GUI 控件样式

本页列出了用于窗口的通用及扩展样式,同时还列出了用于控件的样式. 这些样式能作为"样式"和/或"扩展样式"参数用于大部分的 GUI 函数中.要使用这些值必须使用 #include 语句包含该文件到您的脚本中.

注意:下表给出的"值"仅供参考,为了使脚本的可读性更好您应该尽量使用这些样式的"名称".

公共样式	值	详细信息
		#include <WindowsConstants.au3>
GUI创建时默认/强制样式		$GUI_SS_DEFAULT_GUI 请查看 GUICreate 函数.
$WS_BORDER	0x00800000	创建一个细边框的窗口.
$WS_POPUP	0x80000000	创建一个弹出式窗口.此样式不能和 WS_CHILD 同时使用.
$WS_CAPTION	0x00C00000	创建一个带有标题栏的窗口(包含 WS_BORDER 样式)
$WS_CLIPCHILDREN	0x02000000	当在父窗口内绘图时,排除子窗口区域.在创建父窗口时将使用此样式.
$WS_CLIPSIBLINGS	0x04000000	Clips child windows relative to each other; that is, when a particular child window receives a WM_PAINT message, the WS_CLIPSIBLINGS style clips all other overlapping child windows out of the region of the child window to be updated. If WS_CLIPSIBLINGS is not specified and child windows overlap, it is possible, when drawing within the client area of a child window, to draw within the client area of a neighboring child window.
$WS_DISABLED	0x08000000	创建一个初始状态为不可用的窗口.
$WS_DLGFRAME	0x00400000	创建一个带有对话框边框的窗口.
$WS_HSCROLL	0x00100000	创建一个带有水平滚动条的窗口.
$WS_MAXIMIZE	0x01000000	创建一个初始状态为最大化的窗口.
$WS_MAXIMIZEBOX	0x00010000	创建一个带有最大化按钮的窗口.不能和 WS_EX_CONTEXTHELP 样式同时使用.必须带有 WS_SYSMENU 样式.
$WS_MINIMIZE	0x20000000	创建一个初始状态为最小化的窗口.
$WS_MINIMIZEBOX	0x00020000	创建一个带有最小化按钮的窗口.不能和 WS_EX_CONTEXTHELP同时使用.必须带有 WS_SYSMENU 样式.
$WS_OVERLAPPED	0x00000000	创建一个层叠的窗口.层叠的窗口带有标题栏和边框.和 WS_TILED 样式相同.
$WS_OVERLAPPEDWINDOW	0x00CF0000	创建一个带有WS_OVERLAPPED, WS_CAPTION, WS_SYSMENU, WS_THICKFRAME, WS_MINIMIZEBOX, 和 WS_MAXIMIZEBOX 样式的窗口. 与 WS_TILEDWINDOW 样式相同.
$WS_POPUPWINDOW	0x80880000	创建一个带有 WS_BORDER, WS_POPUP 以及 WS_SYSMENU 样式的弹出式窗口.为使窗口的菜单可见必须添加 WS_CAPTION 和 WS_POPUPWINDOW 样式.
$WS_SIZEBOX	0x00040000	创建一个可调整边框的窗口.和 WS_THICKFRAME样式相同.
$WS_SYSMENU	0x00080000	创建一个标题栏上有窗口菜单的窗口.必须添加 WS_CAPTION 样式.
$WS_THICKFRAME	0x00040000	创建一个可调整边框的窗口.和 WS_SIZEBOX 样式相同.
$WS_VSCROLL	0x00200000	创建一个带有垂直滚动条的窗口.
$WS_VISIBLE	0x10000000	创建一个初始状态为可见的窗口.
$WS_CHILD	0x40000000	创建一个子窗口.带有此风格的窗口不能带有菜单栏.此样式不能和 WS_POPUP 样式同时使用.
$WS_GROUP	0x00020000	指定控件组的第一个控件.控件组由第一个控件和其后定义的所有控件组成,一直到下一个控件带有 WS_GROUP 样式为止.
$WS_TABSTOP	0x00010000	使控件具有 tabstop,使用户能按下 Tab 键在对话框的各个(具有 tabstop 的)控件间切换(以选择控件).
$DS_MODALFRAME	0x00000080	创建一个带有模式对话框框架的窗口,在指定了 WS_CAPTION 和 WS_SYSMENU 样式后还可以让窗口带有标题栏和窗口菜单.
$DS_SETFOREGROUND	0x00000200	此样式对模式对话框比较有用,它能使用户立即注意到此对话框,而不管它的主属窗口是否活动(当前)窗口.
$DS_CONTEXTHELP	0x00002000	使对话框的标题栏上显示一个问号按钮.此样式不能和 WS_MAXIMIZEBOX 或 WS_MINIMIZEBOX 样式同时使用.和 WS_EX_CONTEXTHELP 扩展样式相同.

公共扩展样式	值	详细信息
		#include <WindowsConstants.au3>
$WS_EX_ACCEPTFILES	0x00000010	允许(用户)通过拖放让被创建的GUI窗口中的编辑框/输入控件接受文件名.该控件也必须具有 $GUI_ACCEPTFILES 状态(由 GUICtrlSetState 设置).
$WS_EX_APPWINDOW	0x00040000	当窗口可见时将一个顶层窗口放到任务栏上.
$WS_EX_COMPOSITED	0x02000000	Windows XP or above: Paints all descendants of a window in bottom-to-top painting order using double-buffering.
$WS_EX_CLIENTEDGE	0x00000200	使窗口带有凹陷边框.
$WS_EX_CONTEXTHELP	0x00000400	使窗口标题栏带有一个问号标志,不能和 WS_MAXIMIZEBOX 或 WS_MINIMIZEBOX 同时使用.
$WS_EX_DLGMODALFRAME	0x00000001	创建一个带有双层边框的窗口；对这种窗口还可以在创建时通过在样式参数中指定 WS_CAPTION 样式使其带有标题栏(可选).
$WS_EX_LAYOUTRTL	0x400000	Specifies that a window has a layout from right to left (RTL) instead of the standard left to right (LTR).
$WS_EX_MDICHILD	0x00000040	在父窗口中建立一个子窗口.(模拟一个MDI窗口,但是子窗口的最大化/最小化按钮不能模拟).
$WS_EX_OVERLAPPEDWINDOW	0x00000300	相当于 WS_EX_CLIENTEDGE 和 WS_EX_WINDOWEDGE 样式的组合.
$WS_EX_STATICEDGE	0x00020000	创建一个带有三维边框样式的窗口,一般用于不接受用户输入的项目.
$WS_EX_TOPMOST	0x00000008	使带有此样式的窗口放置在所有非顶层窗口之上,而且即使在该窗口失去激活状态时还总是保持在它们之上.
$WS_EX_TRANSPARENT	0x00000020	该窗口将透明显示,因为在它下方的同属窗口已被重绘.
$WS_EX_TOOLWINDOW	0x00000080	创建一个工具窗口;也即,一个一般用作浮动工具栏的窗口. 工具窗口的标题栏比普通标题栏要短,而且它的窗口标题使用更小的字体.工具窗口在任务栏上不显示按钮,用户按下热键 Alt+Tab 后在弹出的对话框中也不会显示它的图标.如果一个工具窗口拥有系统菜单,那么它的图标不会在其标题栏上显示出来.不过,您可以按下热键 Alt+空格来显示它的系统菜单.
$WS_EX_WINDOWEDGE	0x00000100	使窗口带有凸起边框.
$WS_EX_LAYERED	0x00080000	创建一个分层的窗口.注意,此样式不能用于子窗口.
$GUI_WS_EX_PARENTDRAG	0x00100000	允许拖动标签(label)或者图片(Pic)控件时即拖动整个父窗口.

检查框(Checkbox)样式	值	详细信息
		#include <ButtonConstants.au3>
默认/强制性		参考 GUICtrlCreateCheckbox 函数.
$BS_3STATE	0x0005	Creates a check box in which the box can be unavailable as well as selected or cleared. Use the unavailable state to show that the state of the check box is not determined.
$BS_AUTO3STATE	0x0006	Creates a three-state check box in which the state cycles through selected, unavailable, and cleared each time the user selects the check box.
$BS_AUTOCHECKBOX	0x0003	Creates a check box in which the check state switches between selected and cleared each time the user selects the check box.
$BS_CHECKBOX	0x0002	Creates a small, empty check box with a label displayed to the right of it. To display the text to the left of the check box, combine this flag with the BS_RIGHTBUTTON style.
$BS_LEFT	0x0100	Left-aligns the text in the button rectangle on the right side of the check box.
$BS_PUSHLIKE	0x1000	Makes a button (such as a check box, three-state check box, or radio button) look and act like a push button. The button looks raised when it isn't pushed or checked, and sunken when it is pushed or checked.
$BS_RIGHT	0x0200	Right-aligns text in the button rectangle on the right side of the check box.
$BS_RIGHTBUTTON	0x0020	Positions a check box square on the right side of the button rectangle.
$BS_GROUPBOX	0x0007	Creates a rectangle in which other buttons can be grouped. Any text associated with this style is displayed in the rectangle's upper-left corner.
$BS_AUTORADIOBUTTON	0x0009	Same as a radio button, except that when the user selects it, the button automatically highlights itself and removes the selection from any other radio buttons with the same style in the same group.

按钮(Button)控件样式	值	详细信息
		#include <ButtonConstants.au3>
Default/forced		参考 GUICtrlCreateButton, GUICtrlCreateCheckbox, GUICtrlCreateRadio 函数.
$BS_BOTTOM	0x0800	将文字置于按钮底部.
$BS_CENTER	0x0300	水平居中按钮文本.
$BS_DEFPUSHBUTTON	0x0001	创建一个带黑边的按钮. 如果是一个对话框, 用户可以使用回车键选择这个按钮, 即使按钮并不具有输入焦点也同样可用. 这个样式通常用于用户快速的选择合适的选项或者默认选项.
$BS_MULTILINE	0x2000	如果单行的文字太长不能在按钮上正常显示,那么它可以让文本使用多行显示.
$BS_TOP	0x0400	放置文本在按钮的顶端.
$BS_VCENTER	0x0C00	垂直居中按钮文本.
$BS_ICON	0x0040	让按钮可以显示图标(ICO).
$BS_BITMAP	0x0080	让按钮可以显示位图(BMP).
$BS_FLAT	0x8000	使用二维方式显示按钮,它没有三维显示的阴影.
$BS_NOTIFY	0x4000	Enables a button to send BN_KILLFOCUS and BN_SETFOCUS notification messages to its parent window. Note that buttons send the BN_CLICKED notification message regardless of whether it has this style. To get BN_DBLCLK notification messages, the button must have the BS_RADIOBUTTON or BS_OWNERDRAW style.

组合框(Combo)样式	值	详细信息
		#include <ComboConstants.au3>
默认/强制		$GUI_SS_DEFAULT_COMBO 参考 GUICtrlCreateCombo 函数.
$CBS_AUTOHSCROLL	0x0040	Automatically scrolls the text in an edit control to the right when the user types a character at the end of the line. If this style is not set, only text that fits within the rectangular boundary is enabled.
$CBS_DISABLENOSCROLL	0x0800	Shows a disabled vertical scroll bar in the list box when the box does not contain enough items to scroll. Without this style, the scroll bar is hidden when the list box does not contain enough items.
$CBS_DROPDOWN	0x0002	Displays only the edit control by default. The user can display the list box by selecting an icon next to the edit control.
$CBS_DROPDOWNLIST	0x0003	Displays a static text field that displays the current selection in the list box.
$CBS_LOWERCASE	0x4000	Converts to lowercase any uppercase characters that are typed into the edit control of a combo box.
$CBS_NOINTEGRALHEIGHT	0x0400	Specifies that the combo box will be exactly the size specified by the application when it created the combo box. Usually, Windows CE sizes a combo box so that it does not display partial items.
$CBS_OEMCONVERT	0x0080	Converts text typed in the combo box edit control from the Windows CE character set to the OEM character set and then back to the Windows CE set. This style is most useful for combo boxes that contain file names. It applies only to combo boxes created with the CBS_DROPDOWN style.
$CBS_SIMPLE	0x0001	Displays the list box at all times. The current selection in the list box is displayed in the edit control.
$CBS_SORT	0x0100	Sorts strings that are typed into the list box.
$CBS_UPPERCASE	0x2000	Converts to uppercase any lowercase characters that are typed into the edit control of a combo box.

列表(List)样式	值	详细信息
		#include <ListboxConstants.au3>
Default/forced		$GUI_SS_DEFAULT_LIST 参考 GUICtrlCreateList 函数.
$LBS_DISABLENOSCROLL	0x1000	Shows a disabled vertical scroll bar for the list box when the box does not contain enough items to scroll. If you do not specify this style, the scroll bar is hidden when the list box does not contain enough items.
$LBS_NOINTEGRALHEIGHT	0x0100	Specifies that the list box will be exactly the size specified by the application when it created the list box.
$LBS_NOSEL	0x4000	Specifies that the user can view list box strings but cannot select them.
$LBS_NOTIFY	0x0001	Notifies the parent window when the user taps or double-taps a string in the list box.
$LBS_SORT	0x0002	Sorts strings in the list box alphabetically.
$LBS_STANDARD	0xA00003	Sorts strings in the list box alphabetically. The parent window receives an input message when the user taps or double-taps a string. The list box has borders on all sides. (LBS_NOTIFY \| LBS_SORT \| WS_VSCROLL \| WS_BORDER)
$LBS_USETABSTOPS	0x0080	Enables a list box to recognize and expand tab characters when drawing its strings. The default tab positions are 32 dialog box units. A dialog box unit is equal to one-fourth of the current dialog box base-width unit.

编辑(Edit)/输入(Input)控件样式	值	详细信息
		#include <EditConstants.au3>
Default/forced		$GUI_SS_DEFAULT_EDIT, $GUI_SS_DEFAULT_INPUT see GUICtrlCreateEdit or GUICtrlCreateInput function.
$ES_AUTOHSCROLL	0x0080	Automatically scrolls text to the right by 10 characters when the user types a character at the end of the line. When the user presses the ENTER key, the control scrolls all text back to the zero position.
$ES_AUTOVSCROLL	0x0040	Scrolls text up one page when the user presses the ENTER key on the last line.
$ES_CENTER	0x0001	Centers text in a multiline edit control.
$ES_LOWERCASE	0x0010	Converts all characters to lowercase as they are typed into the edit control.
$ES_NOHIDESEL	0x0100	Negates the default behavior for an edit control. The default behavior hides the selection when the control loses the input focus and inverts the selection when the control receives the input focus. If you specify ES_NOHIDESEL, the selected text is inverted, even if the control does not have the focus.
$ES_NUMBER	0x2000	Accepts into the edit control only digits to be typed.
$ES_OEMCONVERT	0x0400	This style is most useful for edit controls that contain file names.
$ES_MULTILINE	0x0004	Designates a multiline edit control. The default is a single-line edit control.
$ES_PASSWORD	0x0020	Displays an asterisk (*) for each character that is typed into the edit control.
$ES_READONLY	0x0800	Prevents the user from typing or editing text in the edit control.
$ES_RIGHT	0x0002	Right-aligns text in a multiline edit control.
$ES_UPPERCASE	0x0008	Converts all characters to uppercase as they are typed into the edit control.
$ES_WANTRETURN	0x1000	Specifies that a carriage return be inserted when the user presses the ENTER key while typing text into a multiline edit control in a dialog box. If you do not specify this style, pressing the ENTER key has the same effect as pressing the dialog box's default push button. This style has no effect on a single-line edit control.

进度条(Progress Bar)控件样式	值	详细信息
		#include <ProgressConstants.au3>
$PBS_MARQUEE	0x00000008	Displays progress status as a scrolling marquee.
$PBS_SMOOTH	0x01	Displays progress status in a smooth scrolling bar instead of the default segmented bar.
$PBS_VERTICAL	0x04	Displays progress status vertically, from bottom to top.

上下按钮(Up-down)控件样式	值	详细信息
		#include <UpdownConstants.au3>
Default/forced		$GUI_SS_DEFAULT_UPDOWN 参考 GUICtrlCreateUpdown 函数.
$UDS_ALIGNLEFT	0x08	Positions the up-down control next to the left edge of the buddy window. The buddy window is moved to the right and its width is decreased to accommodate the width of the up-down control.
$UDS_ALIGNRIGHT	0x04	Positions the up-down control next to the right edge of the buddy window. The width of the buddy window is decreased to accommodate the width of the up-down control.
$UDS_ARROWKEYS	0x20	Causes the up-down control to process the UP ARROW and DOWN ARROW keys on the keyboard.
$UDS_HORZ	0x40	Causes the up-down control's arrows to point left and right instead of up and down.
$UDS_NOTHOUSANDS	0x80	Prevents insertion of a thousands separator between every three decimal positions.
$UDS_WRAP	0x01	Causes the position to wrap if it is incremented or decremented beyond the end or beginning of the range.

标签(Label)/静态文本(Static)控件样式	值	详细信息
		#include <StaticConstants.au3>
Default/forced		$GUI_SS_DEFAULT_LABEL, $GUI_SS_DEFAULT_ICON, $GUI_SS_DEFAULT_PIC see GUICtrlCreateLabel, GUICtrlCreateIcon, GUICtrlCreatePic functions.
$SS_BLACKFRAME	0x07	Specifies a box with a frame drawn in the same color as the window frames. This color is black in the default color scheme.
$SS_BLACKRECT	0x04	Specifies a rectangle filled with the current window frame color. This color is black in the default color scheme.
$SS_CENTER	0x01	Specifies a simple rectangle and centers the error value text in the rectangle. The control automatically wraps words that extend past the end of a line to the beginning of the next centered line.
$SS_CENTERIMAGE	0x0200	Specifies that the midpoint of a static control with the SS_BITMAP style will remain fixed when you resize the control. The four sides are adjusted to accommodate a new bitmap. If the bitmap is smaller than the control's client area, the rest of the client area is filled with the color of the pixel in the upper-left corner of the bitmap. It can be used with static control having only one line of text. Microsoft Windows XP: This style bit no longer results in unused portions of the control being filled with the color of the top left pixel of the bitmap or icon. Unused portions of the control will remain the background color.
$SS_ETCHEDFRAME	0x12	Draws the frame of the static control using the EDGE_ETCHED edge style.
$SS_ETCHEDHORZ	0x10	Draws the top and bottom edges of the static control using the EDGE_ETCHED edge style.
$SS_ETCHEDVERT	0x11	Draws the left and right edges of the static control using the EDGE_ETCHED edge style.
$SS_GRAYFRAME	0x08	Specifies a box with a frame drawn with the same color as the screen background (desktop). This color is gray in the default color scheme
$SS_GRAYRECT	0x05	Specifies a rectangle filled with the current screen background color. This color is gray in the default color scheme.
$SS_LEFT	0x0000	Specifies a simple rectangle and left-aligns the text in the rectangle. The text is formatted before it is displayed. Words that extend past the end of a line are automatically wrapped to the beginning of the next left-aligned line. Words that are longer than the width of the control are truncated.
$SS_LEFTNOWORDWRAP	0x0C	Specifies a rectangle and left-aligns the text in the rectangle. Tabs are expanded, but words are not wrapped. Text that extends past the end of a line is clipped.
$SS_NOPREFIX	0x80	Prevents interpretation of any ampersand (&) characters in the control's text as accelerator prefix characters. An application can combine SS_NOPREFIX with other styles by using the bitwise OR (\|) operator. This can be useful when file names or other strings that might contain an ampersand (&) must be displayed within a static control in a dialog box.
$SS_NOTIFY	0x0100	Sends the parent window the STN_CLICKED notification when the user clicks the control.
$SS_RIGHT	0x0002	Specifies a rectangle and right-aligns the specified text in the rectangle.
$SS_RIGHTJUST	0x0400	Specifies that the lower right corner of a static control with the SS_BITMAP or SS_ICON style is to remain fixed when the control is resized. Only the top and left sides are adjusted to accommodate a new bitmap or icon.
$SS_SIMPLE	0x0B	Specifies a simple rectangle and displays a single line of left-aligned text in the rectangle. The text line cannot be shortened or altered in any way. Also, if the control is disabled, the control does not gray its text.
$SS_SUNKEN	0x1000	Draws a half-sunken border around a static control.
$SS_WHITEFRAME	0x09	Specifies a box with a frame drawn with the same color as the window background. This color is white in the default color scheme.
$SS_WHITERECT	0x06	Specifies a rectangle filled with the current window background color. This color is white in the default color scheme.

标签(Tab)控件样式	值	详细信息
		#include <TabConstants.au3>
默认值/强制值		参考 GUICtrlCreateTab 函数.
$TCS_SCROLLOPPOSITE	0x0001	Unneeded tabs scroll to the opposite side of the control when a tab is selected.
$TCS_BOTTOM	0x0002	Tabs appear at the bottom of the control. This value equals TCS_RIGHT. This style is not supported if you use ComCtl32.dll version 6.
$TCS_RIGHT	0x0002	Tabs appear vertically on the right side of controls that use the TCS_VERTICAL style. This value equals TCS_BOTTOM. This style is not supported if you use visual styles.
$TCS_MULTISELECT	0x0004	Multiple tabs can be selected by holding down CTRL when clicking. This style must be used with the TCS_BUTTONS style.
$TCS_FLATBUTTONS	0x0008	Selected tabs appear as being indented into the background while other tabs appear as being on the same plane as the background. This style only affects tab controls with the TCS_BUTTONS style.
$TCS_FORCEICONLEFT	0x0010	Icons are aligned with the left edge of each fixed-width tab. This style can only be used with the TCS_FIXEDWIDTH style.
$TCS_FORCELABELLEFT	0x0020	Labels are aligned with the left edge of each fixed-width tab; that is, the label is displayed immediately to the right of the icon instead of being centered. This style can only be used with the TCS_FIXEDWIDTH style, and it implies the TCS_FORCEICONLEFT style.
$TCS_HOTTRACK	0x0040	Items under the pointer are automatically highlighted
$TCS_VERTICAL	0x0080	Tabs appear at the left side of the control, with tab text displayed vertically. This style is valid only when used with the TCS_MULTILINE style. To make tabs appear on the right side of the control, also use the TCS_RIGHT style. This style is not supported if you use ComCtl32.dll version 6.
$TCS_TABS	0x0000	Tabs appear as tabs, and a border is drawn around the display area. This style is the default.
$TCS_BUTTONS	0x0100	Tabs appear as buttons, and no border is drawn around the display area.
$TCS_SINGLELINE	0x0000	Only one row of tabs is displayed. The user can scroll to see more tabs, if necessary. This style is the default.
$TCS_MULTILINE	0x0200	Multiple rows of tabs are displayed, if necessary, so all tabs are visible at once.
$TCS_RIGHTJUSTIFY	0x0000	The width of each tab is increased, if necessary, so that each row of tabs fills the entire width of the tab control. This window style is ignored unless the TCS_MULTILINE style is also specified.
$TCS_FIXEDWIDTH	0x0400	All tabs are the same width. This style cannot be combined with the TCS_RIGHTJUSTIFY style.
$TCS_RAGGEDRIGHT	0x0800	Rows of tabs will not be stretched to fill the entire width of the control. This style is the default.
$TCS_FOCUSONBUTTONDOWN	0x1000	The tab control receives the input focus when clicked.
$TCS_OWNERDRAWFIXED	0x2000	The parent window is responsible for drawing tabs.
$TCS_TOOLTIPS	0x4000	The tab control has a tooltip control associated with it.
$TCS_FOCUSNEVER	0x8000	The tab control does not receive the input focus when clicked.

AVI剪辑(Avi Clip)控件样式	值	详细信息
		#include <AVIConstants.au3>
Default/forced		$GUI_SS_DEFAULT_AVI see GUICtrlCreateAvi function.
$ACS_AUTOPLAY	0x04	Starts playing the animation as soon as the AVI clip is opened.
$ACS_CENTER	0x01	Centers the animation in the animation control's window.
$ACS_TRANSPARENT	0x02	Allows you to match an animation's background color to that of the underlying window, creating a "transparent" background. (Default value)
$ACS_NONTRANSPARENT	0x10	To override default ACS_TRANSPARENT

日期(Date)控件样式	值	详细信息
		#include <DateTimeConstants.au3>
默认值/强制值		$GUI_SS_DEFAULT_DATE 参考 GUICtrlCreateDate 函数.
$DTS_UPDOWN	0x01	Places an up-down control to the right of a DTP control to modify time values. This style can be used instead of the drop-down month calendar, which is the default style.
$DTS_SHOWNONE	0x02	Enables the control to accept "no date" as a valid selection state.
$DTS_LONGDATEFORMAT	0x04	Displays the date in long format. The default format string for this style is defined by LOCALE_SLONGDATEFORMAT, which produces output like "Friday, April 19, 1998."
$DTS_TIMEFORMAT	0x09	Displays the time. The default format string for this style is defined by LOCALE_STIMEFORMAT, which produces output like "5:31:42 PM."
$DTS_RIGHTALIGN	0x20	The drop-down month calendar will be right-aligned with the control instead of left-aligned, which is the default.
$DTS_SHORTDATEFORMAT	0x00	Displays the date in short format. The default format string for this style is defined by LOCALE_SSHORTDATE, which produces output like "4/19/96".

月历(MonthCal)控件样式	值	详细信息
		#include <DateTimeConstants.au3>
Default/forced		参考 GUICtrlCreateMonthCal 函数.
$MCS_NOTODAY	0x10	月历控件将不会显示 "今天" 日期在控件底部.
$MCS_NOTODAYCIRCLE	0x08	The month calendar control will not circle the "today" date.
$MCS_WEEKNUMBERS	0x04	The month calendar control will display week numbers (1-52) to the left of each row of days. Week 1 is defined as the first week that contains at least four days.

树形视图(TreeView)控件样式	值	详细信息
		#include <TreeviewConstants.au3>
Default/forced		$GUI_SS_DEFAULT_TREEVIEW 参考 GUICtrlCreateTreeView 函数.
$TVS_HASBUTTONS	0x0001	Displays plus (+) and minus (-) buttons next to parent items. The user clicks the buttons to expand or collapse a parent item's list of child items. To include buttons with items at the root of the tree view, TVS_LINESATROOT must also be specified.
$TVS_HASLINES	0x0002	Uses lines to show the hierarchy of items.
$TVS_LINESATROOT	0x0004	Uses lines to link items at the root of the tree view control. This value is ignored if TVS_HASLINES is not also specified.
$TVS_DISABLEDRAGDROP	0x0010	Prevents the tree view control from sending TVN_BEGINDRAG notification messages.
$TVS_SHOWSELALWAYS	0x0020	Causes a selected item to remain selected when the tree view control loses focus.
$TVS_RTLREADING	0x0040	Normal windows display text left-to-right (LTR). Windows can be mirrored to display languages such as Hebrew or Arabic that read right-to-left (RTL). Normally, tree view text will be displayed in same direction as the the text in its parent window. If TVS_RTLREADING is set, tree view text will read in the opposite direction from the text in the parent window.
$TVS_NOTOOLTIPS	0x0080	树形视图控件不支持工具提示(tooltips).
$TVS_CHECKBOXES	0x0100	启用树形视图控件中的检查框(check boxes). Once a tree-view control is created with this style, the style cannot be removed. Instead, you must destroy the control and create a new one in its place.
$TVS_TRACKSELECT	0x0200	Enables hot tracking in a tree view control.
$TVS_SINGLEEXPAND	0x0400	When this style is enabled, changing the selection in the tree view will automatically cause the item being selected to expand and the item being unselected to collapse. If the mouse is used to single-click the selected item and that item is closed, it will be expanded. If the user holds the CTRL key down while selecting an item, the item being unselected will not be collapsed.
$TVS_FULLROWSELECT	0x1000	Enables full-row selection in the tree view. The entire row of the selected item is highlighted, and clicking anywhere on an item's row will cause it to be selected. This style cannot be used in conjunction with the TVS_HASLINES style.
$TVS_NOSCROLL	0x2000	Disables both horizontal and vertical scrolling in the control. The control will not display any scroll bars.
$TVS_NONEVENHEIGHT	0x4000	The height of the items can be set to an odd height with the TVM_SETITEMHEIGHT message. By default, the height of items must be an even value.

Slider 样式	值	详细信息
		#include <SliderConstants.au3>
Default/forced		$GUI_SS_DEFAULT_SLIDER 参考 GUICtrlCreateSlider 函数.
$TBS_AUTOTICKS	0x0001	Adds tick marks when you set the range on the trackbar by using the TBM_SETRANGE message.
$TBS_BOTH	0x0008	Places ticks on both sides of the trackbar.
$TBS_BOTTOM	0x0000	Places ticks on the bottom of a horizontal trackbar.
$TBS_HORZ	0x0000	Specifies a horizontal trackbar. This is the default.
$TBS_VERT	0x0002	Places ticks on the left side of a vertical trackbar.
$TBS_NOTHUMB	0x0080	Specifies that the trackbar has no slider.
$TBS_NOTICKS	0x0010	Specifies that no ticks are placed on the trackbar.
$TBS_LEFT	0x0004	Places ticks on the left side of a vertical trackbar.
$TBS_RIGHT	0x0000	Places ticks on the right side of a vertical trackbar.
$TBS_TOP	0x0004	Places ticks on the top of a horizontal trackbar.

列表视图(ListView)控件样式	值	详细信息
		#include <ListviewConstants.au3>
默认/强制		$GUI_SS_DEFAULT_LISTVIEW 查看 GUICtrlCreateListView 函数.
$LVS_ICON	0x0000	这个样式指定控件显示为带大图标的列表.
$LVS_REPORT	0x0001	这个样式指定控件显示为报告样式.
$LVS_SMALLICON	0x0002	这个样式指定控件显示为带小图标的列表.
$LVS_LIST	0x0003	这个样式指定控件显示为一个列表.
$LVS_EDITLABELS	0x0200	项目文本可以被编辑替换.
$LVS_NOCOLUMNHEADER	0x4000	不在报告样式中显示列表头. 默认情况下, 列表头在报告样式的ListView控件中是存在的.
$LVS_NOSORTHEADER	0x8000	列表头就像按钮一样,并且不能用来自动排序. 这个样式可以使用于单击一个报告样式的列表头不会执行任何动作.
$LVS_SINGLESEL	0x0004	只需选中一个项目,同样的项目也会被选中(点一个选一行).
$LVS_SHOWSELALWAYS	0x0008	总是显示所有项目的所有文本(注:防止文本长度太长,ListView不能全部显示.原文:The selection, if any, is always shown, even if the control does not have the focus).
$LVS_SORTASCENDING	0x0010	项目索引将使用递增自动排列.
$LVS_SORTDESCENDING	0x0020	项目索引将使用递减自动排列.
$LVS_NOLABELWRAP	0x0080	项目文本显示于图标查看的单行中. 默认情况下, 项目文本将会限制在图标周围.

列表视图(ListView)扩展样式	值	详细信息
		#include <ListviewConstants.au3>
$LVS_EX_FULLROWSELECT	0x00000020	当一个项目被选中,同一行的所有项目也会被选中.
$LVS_EX_GRIDLINES	0x00000001	在项目和子项目周围显示网格.
$LVS_EX_HEADERDRAGDROP	0x00000010	列表头可以使用拖动排列顺序(比如把下载速度行拖动到下载时间后面等等).
$LVS_EX_TRACKSELECT	0x00000008	在列表视图(ListView)控件中使用焦点跟踪,当前焦点会被选中(鼠标光标移动到一个项目上,将会自动赋予焦点并选中)
$LVS_EX_CHECKBOXES	0x00000004	在列表视图(ListView)控件中使用检查框(Check)控件.
$LVS_EX_BORDERSELECT	0x00008000	如果设置了这个样式, 当项目选择了与边界同样的颜色,项目会被设置高亮(突出).
$LVS_EX_DOUBLEBUFFER	0x00010000	Paints via double-buffering, which reduces flicker. This extended style also enables alpha-blended marquee selection on systems where it is supported.
$LVS_EX_FLATSB	0x00000100	列表视图(ListView)使用平坦样式的滚动条.
$LVS_EX_MULTIWORKAREAS	0x00002000	The control will not autoarrange its icons until one or more work areas are defined.
$LVS_EX_SNAPTOGRID	0x00080000	In icon view, icons automatically snap into a grid.
$LVS_EX_SUBITEMIMAGES	0x00000002	允许图像显示于子项目.