函数参考

_GUICtrlButton_SetState

设置按钮的加亮状态. 加亮状态表明按钮是否突出显示,就像鼠标停留在按钮上.

#include <GuiButton.au3>
_GUICtrlButton_SetState($hWnd [, $fHighlighted = True])

参数

$hWnd 控件的控件ID/句柄
$fHighlighted [可选参数] 指定按钮是否突出显示.

返回值

None.

注意/说明

加亮显示仅影响按钮的外表. 对单选按钮或复选框的选择状态没有影响.

当用户在它上面放置光标与点击鼠标左键,按钮自动地被高亮突显.
释放鼠标按钮,加亮显示消失.

相关

_GUICtrlButton_GetState, _GUICtrlButton_SetCheck

详情参考

在MSDN中搜索


示例/演示


#include <GUIConstantsEx.au3>
#include <GuiButton.au3>
#include <WindowsConstants.au3>

Global $iMemo

_Main()

Func _Main()
    Local $rdo, $rdo2, $chk, $chk2, $chk3, $btn, $btn2

    GUICreate("Buttons", 400, 400)
    $iMemo = GUICtrlCreateEdit("", 119, 10, 276, 374, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")

    $btn = GUICtrlCreateButton("Button1", 10, 10, 90, 25)
    _GUICtrlButton_SetState($btn)

    $btn2 = GUICtrlCreateButton("Button2", 10, 60, 90, 25)

    $rdo = GUICtrlCreateRadio("Radio1", 10, 110, 90, 25)
    _GUICtrlButton_SetFocus($rdo)

    $rdo2 = GUICtrlCreateRadio("Radio2", 10, 170, 90, 25)
    _GUICtrlButton_SetCheck($rdo2)

    $chk = GUICtrlCreateCheckbox("Check1", 10, 230, 90, 25, BitOR($BS_AUTO3STATE, $BS_NOTIFY))
    _GUICtrlButton_SetCheck($chk, $BST_INDETERMINATE)

    $chk2 = GUICtrlCreateCheckbox("Check2", 10, 290, 90, 25, BitOR($BS_AUTO3STATE, $BS_NOTIFY))

    $chk3 = GUICtrlCreateCheckbox("Check3", 10, 350, 90, 25, BitOR($BS_AUTO3STATE, $BS_NOTIFY))
    _GUICtrlButton_SetCheck($chk3, $BST_CHECKED)

    GUISetState()

    MemoWrite("Button1 status:" & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($btn), True))
    MemoWrite("Button2 status:" & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($btn2), True))
    MemoWrite("Radio1 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($rdo)))
    MemoWrite("Radio2 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($rdo2)))
    MemoWrite("Check1 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($chk)))
    MemoWrite("Check2 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($chk2)))
    MemoWrite("Check3 status: " & @CRLF & "--------------------------------" & _
            _ExplainState(_GUICtrlButton_GetState($chk3)))

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                ExitLoop
        EndSwitch
    WEnd

    Exit
EndFunc   ;==>_Main

; 写入Memo控件
Func MemoWrite($sMessage)
    GUICtrlSetData($iMemo, $sMessage & @CRLF, 1)
EndFunc   ;==>MemoWrite

Func _ExplainState($iState, $fPushButton = False)
    Local $sText = ""
    If Not $fPushButton And Not $iState Then Return _
            @CRLF & "Indicates the button is cleared. Same as a return value of zero." & @CRLF ;按钮已被清除. 等同于返回0
    If BitAND($iState, $BST_CHECKED) = $BST_CHECKED Then _
            $sText &= @CRLF & "Indicates the button is checked." & @CRLF ;按钮已选中
    If BitAND($iState, $BST_FOCUS) = $BST_FOCUS Then _
            $sText &= @CRLF & "Specifies the focus state. A nonzero value indicates that the button has the keyboard focus." & @CRLF ;按钮具有焦点. 非0值表示有键盘焦点
    If BitAND($iState, $BST_INDETERMINATE) = $BST_INDETERMINATE Then _
            $sText &= @CRLF & "Indicates the button is grayed because the state of the button is indeterminate." & @CRLF ;按钮处于灰色状态
    If $fPushButton Then
        If BitAND($iState, $BST_PUSHED) = $BST_PUSHED Then
            $sText &= @CRLF & "Specifies the highlight state." & @CRLF ;按钮处于高亮状态
        Else
            $sText &= @CRLF & "Specifies not highlighted state." & @CRLF ;按钮未处于高亮状态
        EndIf
    EndIf
    Return $sText
EndFunc   ;==>_ExplainState