取消项目的文本编辑操作
#include <GuiListView.au3>
_GUICtrlListView_CancelEditLabel($hWnd)
| $hWnd | 控件的控件ID/句柄 |
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <GuiImageList.au3>
#include <WindowsConstants.au3>
$Debug_LV = False ; 检查传递给 ListView 函数的类名, 设置为True并输出到一个控件的句柄,用于检查它是否工作
Global $hListView
_Main()
Func _Main()
Local $hImage, $iTime
GUICreate("ListView Cancel Edit", 392, 322)
$hListView = GUICtrlCreateListView("", 2, 2, 394, 268, BitOR($LVS_EDITLABELS, $LVS_REPORT))
GUISetState()
GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")
; 加载图像
$hImage = _GUIImageList_Create()
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap(GUICtrlGetHandle($hListView), 0xFF0000, 16, 16))
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap(GUICtrlGetHandle($hListView), 0x00FF00, 16, 16))
_GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap(GUICtrlGetHandle($hListView), 0x0000FF, 16, 16))
_GUICtrlListView_SetImageList($hListView, $hImage, 1)
; 添加列
_GUICtrlListView_InsertColumn($hListView, 0, "Column 1", 100)
_GUICtrlListView_InsertColumn($hListView, 1, "Column 2", 100)
_GUICtrlListView_InsertColumn($hListView, 2, "Column 3", 100)
; 添加项目
_GUICtrlListView_AddItem($hListView, "Row 1: Col 1", 0)
_GUICtrlListView_AddSubItem($hListView, 0, "Row 1: Col 2", 1)
_GUICtrlListView_AddSubItem($hListView, 0, "Row 1: Col 3", 2)
_GUICtrlListView_AddItem($hListView, "Row 2: Col 1", 1)
_GUICtrlListView_AddSubItem($hListView, 1, "Row 2: Col 2", 1)
_GUICtrlListView_AddItem($hListView, "Row 3: Col 1", 2)
; Edit item 0 label with time out
_GUICtrlListView_EditLabel($hListView, 0)
$iTime = TimerInit()
; 循环直到用户退出
Do
If _GUICtrlListView_GetEditControl($hListView) <> 0 Then
If TimerDiff($iTime) > 3000 Then _GUICtrlListView_CancelEditLabel($hListView)
EndIf
Until GUIGetMsg() = $GUI_EVENT_CLOSE
GUIDelete()
EndFunc ;==>_Main
Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
#forceref $hWnd, $iMsg, $iwParam
Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $tInfo
$hWndListView = $hListView
If Not IsHWnd($hListView) Then $hWndListView = GUICtrlGetHandle($hListView)
$tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
$hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
$iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
$iCode = DllStructGetData($tNMHDR, "Code")
Switch $hWndFrom
Case $hWndListView
Switch $iCode
Case $LVN_COLUMNCLICK ; A column was clicked
$tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
_DebugPrint("$LVN_COLUMNCLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @LF & _
"-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
"-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
"-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
"-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
"-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
"-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
"-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
; 没有返回值
Case $LVN_ITEMCHANGING ; An item is changing
$tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
_DebugPrint("$LVN_ITEMCHANGING" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @LF & _
"-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
"-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
"-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
"-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
"-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
"-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
"-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
Return True ; prevent the change
;Return False ; allow the change
Case $LVN_KEYDOWN ; A key has been pressed
$tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
_DebugPrint("$LVN_KEYDOWN" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @LF & _
"-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
; 没有返回值
Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
$tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
_DebugPrint("$NM_CLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
"-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
"-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
"-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
"-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
"-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
"-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
"-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
"-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
; 没有返回值
Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
$tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
_DebugPrint("$NM_DBLCLK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
"-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
"-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
"-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
"-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
"-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
"-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
"-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
"-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
; 没有返回值
Case $NM_KILLFOCUS ; The control has lost the input focus
_DebugPrint("$NM_KILLFOCUS" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; 没有返回值
Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
$tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
_DebugPrint("$NM_RCLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
"-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
"-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
"-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
"-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
"-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
"-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
"-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
"-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
;Return 1 ; not to allow the default processing
Return 0 ; allow the default processing
Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
$tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
_DebugPrint("$NM_RDBLCLK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode & @LF & _
"-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @LF & _
"-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @LF & _
"-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @LF & _
"-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @LF & _
"-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @LF & _
"-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @LF & _
"-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @LF & _
"-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @LF & _
"-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
; 没有返回值
Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
_DebugPrint("$NM_RETURN" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; 没有返回值
Case $NM_SETFOCUS ; The control has received the input focus
_DebugPrint("$NM_SETFOCUS" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; 没有返回值
EndSwitch
EndSwitch
Return $GUI_RUNDEFMSG
EndFunc ;==>WM_NOTIFY
Func _DebugPrint($s_text, $line = @ScriptLineNumber)
ConsoleWrite( _
"!===========================================================" & @LF & _
"+======================================================" & @LF & _
"-->Line(" & StringFormat("%04d", $line) & "):" & @TAB & $s_text & @LF & _
"+======================================================" & @LF)
EndFunc ;==>_DebugPrint