函数参考

_GUICtrlStatusBar_Create

创建状态栏

#Include <GuiStatusBar.au3>
_GUICtrlStatusBar_Create($hWnd[, $vPartEdge = -1[, $vPartText = ""[, $iStyles = -1[, $iExStyles = 0x00000000]]]])

参数

$hWnd 父窗口句柄
$vPartEdge [可选参数] 部件宽度.如多于一个部件,则指定下面的数组:
$vPartEdge[0] - 部件 #1 右边界
$vPartEdge[1] - 部件 #2 右边界
$vPartEdge[n] - 部件 #n 右边界
$vPartText [可选参数] 部件文本.如多于一个部件文本,则指定下面的数组:
$vPartText[0] - 第一部件
$vPartText[1] - 第二部件
$vPartText[n] - 最后部件
$iStyles [可选参数] 控件样式s:
$SBARS_SIZEGRIP - 状态栏右端包括尺寸一个柄
$SBARS_TOOLTIPS - 状态栏具有工具提示功能
[可选参数] 强制: $WS_CHILD, $WS_VISIBLE
$iExStyles [可选参数] 控件扩展样式

返回值

成功: 返回控件句柄
失败: 返回 0

注意/说明

If using GUICtrlCreateMenu then use _GUICtrlStatusBar_Create after GUICtrlCreateMenu

相关

_GUICtrlStatusBar_Destroy

示例/演示


#include <GUIConstantsEx.au3>
#include <GuiStatusBar.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <WindowsConstants.au3>

$Debug_SB = False ; 检查传递给函数的类名, 设置为True并输出到一个控件的句柄,用于检查它是否工作

Global $iMemo, $MainGUI, $hStatus

Example1()
Example2()
Example3()
Example4()
Example5()
Example6()

Func Example1()

    Local $hGUI
    Local $aParts[3] = [75, 150, -1]

    ; 创建 GUI
    $hGUI = GUICreate("(Example 1) StatusBar Create", 400, 300)

    ;===============================================================================
    ; defaults to 1 part, no text
    $hStatus = _GUICtrlStatusBar_Create($hGUI)
    ;===============================================================================
    _GUICtrlStatusBar_SetParts($hStatus, $aParts)

    ; 创建 memo 控件
    $iMemo = GUICtrlCreateEdit("", 2, 2, 396, 274, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")
    GUICtrlSendMsg($iMemo, $EM_SETREADONLY, True, 0)
    GUICtrlSetBkColor($iMemo, 0xFFFFFF)
    MemoWrite("StatusBar Created with:" & @CRLF & _
            @TAB & "Handle to GUI window" & @CRLF)
    GUISetState()

    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    ; Get border sizes
    MemoWrite("Horizontal border width .: " & _GUICtrlStatusBar_GetBordersHorz($hStatus))
    MemoWrite("Vertical border width ...: " & _GUICtrlStatusBar_GetBordersVert($hStatus))
    MemoWrite("Width between rectangles : " & _GUICtrlStatusBar_GetBordersRect($hStatus))

    ; 循环直到用户退出
    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
    GUISetState(@SW_ENABLE, $MainGUI)
    GUIDelete($hGUI)
EndFunc   ;==>Example1

Func Example2()

    Local $hGUI
    Local $aParts[3] = [75, 150, -1]

    ; 创建 GUI
    $hGUI = GUICreate("(Example 2) StatusBar Create", 400, 300)

    ;===============================================================================
    ; sets parts with no text
    $hStatus = _GUICtrlStatusBar_Create($hGUI, $aParts)
    ;===============================================================================

    ; 创建 memo 控件
    $iMemo = GUICtrlCreateEdit("", 2, 2, 396, 274, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")
    GUICtrlSendMsg($iMemo, $EM_SETREADONLY, True, 0)
    GUICtrlSetBkColor($iMemo, 0xFFFFFF)
    MemoWrite("StatusBar Created with:" & @CRLF & _
            @TAB & "Handle to GUI window" & @CRLF & _
            @TAB & "part width array of 3 elements" & @CRLF)
    GUISetState()

    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    ; Get border sizes
    MemoWrite("Horizontal border width .: " & _GUICtrlStatusBar_GetBordersHorz($hStatus))
    MemoWrite("Vertical border width ...: " & _GUICtrlStatusBar_GetBordersVert($hStatus))
    MemoWrite("Width between rectangles : " & _GUICtrlStatusBar_GetBordersRect($hStatus))

    ; 循环直到用户退出
    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
    GUISetState(@SW_ENABLE, $MainGUI)
    GUIDelete($hGUI)
EndFunc   ;==>Example2

Func Example3()

    Local $hGUI
    Local $aText[3] = ["Left Justified", @TAB & "Centered", @TAB & @TAB & "Right Justified"]
    Local $aParts[3] = [100, 175, -1]

    ; 创建 GUI
    $hGUI = GUICreate("(Example 3) StatusBar Create", 400, 300)

    ;===============================================================================
    ;sets parts and text
    $hStatus = _GUICtrlStatusBar_Create($hGUI, $aParts, $aText)
    ;===============================================================================

    ; 创建 memo 控件
    $iMemo = GUICtrlCreateEdit("", 2, 2, 396, 274, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")
    GUICtrlSendMsg($iMemo, $EM_SETREADONLY, True, 0)
    GUICtrlSetBkColor($iMemo, 0xFFFFFF)
    MemoWrite("StatusBar Created with:" & @CRLF & _
            @TAB & "only Handle," & @CRLF & _
            @TAB & "part width array of 3 elements" & @CRLF & _
            @TAB & "part text array of 3 elements" & @CRLF)
    GUISetState()

    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    ; Get border sizes
    MemoWrite("Horizontal border width .: " & _GUICtrlStatusBar_GetBordersHorz($hStatus))
    MemoWrite("Vertical border width ...: " & _GUICtrlStatusBar_GetBordersVert($hStatus))
    MemoWrite("Width between rectangles : " & _GUICtrlStatusBar_GetBordersRect($hStatus))

    ; 循环直到用户退出
    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
    GUISetState(@SW_ENABLE, $MainGUI)
    GUIDelete($hGUI)
EndFunc   ;==>Example3

Func Example4()

    Local $hGUI
    Local $aText[3] = ["Left Justified", @TAB & "Centered", @TAB & @TAB & "Right Justified"]

    ; 创建 GUI
    $hGUI = GUICreate("(Example 4) StatusBar Create", 400, 300)

    ;===============================================================================
    ; will create part widths based on part size passed in
    $hStatus = _GUICtrlStatusBar_Create($hGUI, 100, $aText)
    ;===============================================================================

    ; 创建 memo 控件
    $iMemo = GUICtrlCreateEdit("", 2, 2, 396, 274, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")
    GUICtrlSendMsg($iMemo, $EM_SETREADONLY, True, 0)
    GUICtrlSetBkColor($iMemo, 0xFFFFFF)
    MemoWrite("StatusBar Created with:" & @CRLF & _
            @TAB & "only Handle," & @CRLF & _
            @TAB & "part width number" & @CRLF & _
            @TAB & "part text array of 3 elements" & @CRLF)
    GUISetState()

    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    ; Get border sizes
    MemoWrite("Horizontal border width .: " & _GUICtrlStatusBar_GetBordersHorz($hStatus))
    MemoWrite("Vertical border width ...: " & _GUICtrlStatusBar_GetBordersVert($hStatus))
    MemoWrite("Width between rectangles : " & _GUICtrlStatusBar_GetBordersRect($hStatus))

    ; 循环直到用户退出
    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
    GUISetState(@SW_ENABLE, $MainGUI)
    GUIDelete($hGUI)
EndFunc   ;==>Example4

Func Example5()

    Local $hGUI
    Local $aText[3] = ["Left Justified", @TAB & "Centered", @TAB & @TAB & "Right Justified"]
    Local $aParts[2] = [100, 175]

    ; 创建 GUI
    $hGUI = GUICreate("(Example 5) StatusBar Create", 400, 300)


    ;===============================================================================
    ; adjusts array to largest array passed in (this time the text array is the largest)
    $hStatus = _GUICtrlStatusBar_Create($hGUI, $aParts, $aText)
    ;===============================================================================

    ; 创建 memo 控件
    $iMemo = GUICtrlCreateEdit("", 2, 2, 396, 274, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")
    GUICtrlSendMsg($iMemo, $EM_SETREADONLY, True, 0)
    GUICtrlSetBkColor($iMemo, 0xFFFFFF)
    MemoWrite("StatusBar Created with:" & @CRLF & _
            @TAB & "only Handle," & @CRLF & _
            @TAB & "part width array of 2 elements" & @CRLF & _
            @TAB & "part text array of 3 elements" & @CRLF)
    GUISetState()

    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    ; Get border sizes
    MemoWrite("Horizontal border width .: " & _GUICtrlStatusBar_GetBordersHorz($hStatus))
    MemoWrite("Vertical border width ...: " & _GUICtrlStatusBar_GetBordersVert($hStatus))
    MemoWrite("Width between rectangles : " & _GUICtrlStatusBar_GetBordersRect($hStatus))

    ; 循环直到用户退出
    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
    GUISetState(@SW_ENABLE, $MainGUI)
    GUIDelete($hGUI)
EndFunc   ;==>Example5

Func Example6()

    Local $hGUI
    Local $aText[2] = ["Left Justified", @TAB & "Centered"]
    Local $aParts[3] = [100, 175, -1]

    ; 创建 GUI
    $hGUI = GUICreate("(Example 6) StatusBar Create", 400, 300)

    ;===============================================================================
    ; adjusts array to largest array passed in (this time the part width array)
    $hStatus = _GUICtrlStatusBar_Create($hGUI, $aParts, $aText)
    ;===============================================================================

    ; 创建 memo 控件
    $iMemo = GUICtrlCreateEdit("", 2, 2, 396, 274, $WS_VSCROLL)
    GUICtrlSetFont($iMemo, 9, 400, 0, "Courier New")
    GUICtrlSendMsg($iMemo, $EM_SETREADONLY, True, 0)
    GUICtrlSetBkColor($iMemo, 0xFFFFFF)
    MemoWrite("StatusBar Created with:" & @CRLF & _
            @TAB & "only Handle," & @CRLF & _
            @TAB & "part width array of 3 elements" & @CRLF & _
            @TAB & "part text array of 2 elements" & @CRLF)
    GUISetState()

    GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

    ; Get border sizes
    MemoWrite("Horizontal border width .: " & _GUICtrlStatusBar_GetBordersHorz($hStatus))
    MemoWrite("Vertical border width ...: " & _GUICtrlStatusBar_GetBordersVert($hStatus))
    MemoWrite("Width between rectangles : " & _GUICtrlStatusBar_GetBordersRect($hStatus))

    ; 循环直到用户退出
    Do
    Until GUIGetMsg() = $GUI_EVENT_CLOSE
    GUISetState(@SW_ENABLE, $MainGUI)
    GUIDelete($hGUI)
EndFunc   ;==>Example6

; 写入消息到 memo
Func MemoWrite($sMessage = "")
    GUICtrlSetData($iMemo, $sMessage & @CRLF, 1)
EndFunc   ;==>MemoWrite

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
    #forceref $hWnd, $iMsg, $iwParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR

    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Local $tinfo
    Switch $hWndFrom
        Case $hStatus
            Switch $iCode
                Case $NM_CLICK ; The user has clicked the left mouse button within the control
                    $tinfo = DllStructCreate($tagNMMOUSE, $ilParam)
                    $hWndFrom = HWnd(DllStructGetData($tinfo, "hWndFrom"))
                    $iIDFrom = DllStructGetData($tinfo, "IDFrom")
                    $iCode = DllStructGetData($tinfo, "Code")
                    _DebugPrint("$NM_CLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->ItemSpec:" & @TAB & DllStructGetData($tinfo, "ItemSpec") & @LF & _
                            "-->ItemData:" & @TAB & DllStructGetData($tinfo, "ItemData") & @LF & _
                            "-->X:" & @TAB & DllStructGetData($tinfo, "X") & @LF & _
                            "-->Y:" & @TAB & DllStructGetData($tinfo, "Y") & @LF & _
                            "-->HitInfo:" & @TAB & DllStructGetData($tinfo, "HitInfo"))
                    Return True ; indicate that the mouse click was handled and suppress default processing by the system
;~                  Return FALSE ;to allow default processing of the click.
                Case $NM_DBLCLK ; The user has double-clicked the left mouse button within the control
                    $tinfo = DllStructCreate($tagNMMOUSE, $ilParam)
                    $hWndFrom = HWnd(DllStructGetData($tinfo, "hWndFrom"))
                    $iIDFrom = DllStructGetData($tinfo, "IDFrom")
                    $iCode = DllStructGetData($tinfo, "Code")
                    _DebugPrint("$NM_DBLCLK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->ItemSpec:" & @TAB & DllStructGetData($tinfo, "ItemSpec") & @LF & _
                            "-->ItemData:" & @TAB & DllStructGetData($tinfo, "ItemData") & @LF & _
                            "-->X:" & @TAB & DllStructGetData($tinfo, "X") & @LF & _
                            "-->Y:" & @TAB & DllStructGetData($tinfo, "Y") & @LF & _
                            "-->HitInfo:" & @TAB & DllStructGetData($tinfo, "HitInfo"))
                    Return True ; indicate that the mouse click was handled and suppress default processing by the system
;~                  Return FALSE ;to allow default processing of the click.
                Case $NM_RCLICK ; The user has clicked the right mouse button within the control
                    $tinfo = DllStructCreate($tagNMMOUSE, $ilParam)
                    $hWndFrom = HWnd(DllStructGetData($tinfo, "hWndFrom"))
                    $iIDFrom = DllStructGetData($tinfo, "IDFrom")
                    $iCode = DllStructGetData($tinfo, "Code")
                    _DebugPrint("$NM_RCLICK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->ItemSpec:" & @TAB & DllStructGetData($tinfo, "ItemSpec") & @LF & _
                            "-->ItemData:" & @TAB & DllStructGetData($tinfo, "ItemData") & @LF & _
                            "-->X:" & @TAB & DllStructGetData($tinfo, "X") & @LF & _
                            "-->Y:" & @TAB & DllStructGetData($tinfo, "Y") & @LF & _
                            "-->HitInfo:" & @TAB & DllStructGetData($tinfo, "HitInfo"))
                    Return True ; indicate that the mouse click was handled and suppress default processing by the system
;~                  Return FALSE ;to allow default processing of the click.
                Case $NM_RDBLCLK ; The user has clicked the right mouse button within the control
                    $tinfo = DllStructCreate($tagNMMOUSE, $ilParam)
                    $hWndFrom = HWnd(DllStructGetData($tinfo, "hWndFrom"))
                    $iIDFrom = DllStructGetData($tinfo, "IDFrom")
                    $iCode = DllStructGetData($tinfo, "Code")
                    _DebugPrint("$NM_RDBLCLK" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode & @LF & _
                            "-->ItemSpec:" & @TAB & DllStructGetData($tinfo, "ItemSpec") & @LF & _
                            "-->ItemData:" & @TAB & DllStructGetData($tinfo, "ItemData") & @LF & _
                            "-->X:" & @TAB & DllStructGetData($tinfo, "X") & @LF & _
                            "-->Y:" & @TAB & DllStructGetData($tinfo, "Y") & @LF & _
                            "-->HitInfo:" & @TAB & DllStructGetData($tinfo, "HitInfo"))
                    Return True ; indicate that the mouse click was handled and suppress default processing by the system
;~                  Return FALSE ;to allow default processing of the click.
                Case $SBN_SIMPLEMODECHANGE ; Simple mode changes
                    _DebugPrint("$SBN_SIMPLEMODECHANGE" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @LF & _
                            "-->Code:" & @TAB & $iCode)
                    ; 没有返回值
            EndSwitch
    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

Func _DebugPrint($s_text, $line = @ScriptLineNumber)
    ConsoleWrite( _
            "!===========================================================" & @LF & _
            "+======================================================" & @LF & _
            "-->Line(" & StringFormat("%04d", $line) & "):" & @TAB & $s_text & @LF & _
            "+======================================================" & @LF)
EndFunc   ;==>_DebugPrint