大家来看是3.3.6.1 第二汉化版一个BUG吗？
本帖最后由 gzh888666 于 2010-11-10 00:11 编辑新建一个AU3文档内容如下：#Region AutoIt3Wrapper 预编译参数(完整参数)
;** 这个列表中中的编译器定义是为 AutoIt3Wrapper.exe 使用的，同时也兼容ACN论坛的ACNWrapper.exe.
;** 注释行不需要您删除，这是一些描述信息，不会到最终的EXE中.
;===============================================================================================================
;** AUTOIT3 设置
#AutoIt3Wrapper_UseX64= ;(Y/N) 使用 X64 版本的 AutoIt3_x64/AUT2EXE_x64. 默认=N
#AutoIt3Wrapper_Run_Debug_Mode= ;(Y/N) 运行脚本于控制图调试. 默认=N
#AutoIt3Wrapper_Run_SciTE_Minimized= ;(Y/N) Minimize SciTE while script is running. Default=n
#AutoIt3Wrapper_Run_SciTE_OutputPane_Minimized= ;(Y/N) Toggle SciTE output pane at run time so its not shown. Default=n
;===============================================================================================================
;** AUT2EXE 设置
#AutoIt3Wrapper_Icon= ;需要使用的图标(路径)名称,支持EXE,DLL,ICO
#AutoIt3Wrapper_OutFile= ;目标 exe/a3x 文件名.
#AutoIt3Wrapper_OutFile_Type=exe ;a3x=小型 AutoIt3 文件; exe=标准可执行文件(默认)
#AutoIt3Wrapper_Compression= ;压缩参数 0-4 ?=低 2=中 4=高 默认=2
#AutoIt3Wrapper_UseUpx= ;(Y/N) 压缩输出的程序.默认=Y
#AutoIt3Wrapper_UPX_Parameters= ;Override the default setting for UPX.
#AutoIt3Wrapper_Change2CUI= ;(Y/N) 修改输出的程序为CUI(控制台程序). 默认=N
;===============================================================================================================
;** 目标程序资源信息
#AutoIt3Wrapper_Res_Comment= ;注释
#AutoIt3Wrapper_Res_Description= ;详细信息
#AutoIt3Wrapper_Res_Fileversion= ;文件版本
#AutoIt3Wrapper_Res_FileVersion_AutoIncrement=;(Y/N/P)自动更新版本. 默认=N P=提示
#AutoIt3Wrapper_Res_ProductVersion= ;Product Version. Default is the AutoIt3 version used.
#AutoIt3Wrapper_Res_Language= ;资源语言代码. 官方默认 2057=英语 (英国),ACN版本默认 2052=简体中文(中国)
#AutoIt3Wrapper_Res_LegalCopyright= ;版权
#AutoIt3Wrapper_res_requestedExecutionLevel= ;None, asInvoker, highestAvailable or requireAdministrator (默认=None)
#AutoIt3Wrapper_res_Compatibility= ;Vista,Windows7 . Both alloweed seperated by a comma (default=None)
#AutoIt3Wrapper_Res_SaveSource= ;(Y/N) 保持源代码备份到EXE资源中. 默认=N
; If _Res_SaveSource=Y the content of Scriptsource depends on the _Run_Obfuscator and #obfuscator_parameters directives:
;
; If _Run_Obfuscator=Y then
; If #obfuscator_parameters=/STRIPONLY then Scriptsource is stripped script & stripped includes
; If #obfuscator_parameters=/STRIPONLYINCLUDES then Scriptsource is original script & stripped includes
; With any other parameters, the SaveSource directive is ignored as obfuscation is intended to protect the source
; If _Run_Obfuscator=N or is not set then
; Scriptsource is original script only
; Autoit3Wrapper indicates the SaveSource action taken in the SciTE console during compilation
; See SciTE4AutoIt3 Helpfile for more detail on Obfuscator parameters
;
;
; free form resource fields ... max 15
; you can use the following variables:
; %AutoItVer% which will be replaced with the version of AutoIt3
; %date% = PC date in short date format
; %longdate% = PC date in long date format
; %time% = PC timeformat
;eg: #AutoIt3Wrapper_Res_Field=AutoIt Version|%AutoItVer%
#AutoIt3Wrapper_Res_Field= ;Free format fieldname|fieldvalue
#AutoIt3Wrapper_Res_Field= ;Free format fieldname|fieldvalue
#AutoIt3Wrapper_Res_Field= ;Free format fieldname|fieldvalue
; Add extra ICO files to the resources which can be used with TraySetIcon(@ScriptFullPath, 5) etc
; list of filename of the Ico files to be added, First one will have number 5, then 6 ..etc
#AutoIt3Wrapper_Res_Icon_Add= ; Filename[,LanguageCode] of ICO to be added.
#AutoIt3Wrapper_Res_Icon_Add= ; Filename[,LanguageCode] of ICO to be added.
; Add extra files to the resources
#AutoIt3Wrapper_Res_File_Add= ; Filename[,Section [,ResName[,LanguageCode]]] to be added.
#AutoIt3Wrapper_Res_File_Add= ; Filename[,Section [,ResName[,LanguageCode]]] to be added.
;===============================================================================================================
; Tidy Settings
#AutoIt3Wrapper_Run_Tidy= ;(Y/N) Run Tidy before compilation. default=N
#AutoIt3Wrapper_Tidy_Stop_OnError= ;(Y/N) Continue when only Warnings. default=Y
#Tidy_Parameters= ;Tidy Parameters...see SciTE4AutoIt3 Helpfile for options
;===============================================================================================================
; Obfuscator
#AutoIt3Wrapper_Run_Obfuscator= ;(Y/N) Run Obfuscator before compilation. default=N
#obfuscator_parameters=
;===============================================================================================================
; AU3Check settings
#AutoIt3Wrapper_Run_AU3Check= ;(Y/N) Run au3check before compilation. Default=Y
#AutoIt3Wrapper_AU3Check_Parameters= ;Au3Check parameters
#AutoIt3Wrapper_AU3Check_Stop_OnWarning= ;(Y/N) N=Continue on Warnings.(Default) Y=Always stop on Warnings
#AutoIt3Wrapper_PlugIn_Funcs= ;Define PlugIn function names separated by a Comma to avoid AU3Check errors
;===============================================================================================================
; cvsWrapper settings
#AutoIt3Wrapper_Run_cvsWrapper= ;(Y/N/V) Run cvsWrapper to update the script source. default=N
; V=only when version is increased by #AutoIt3Wrapper_Res_FileVersion_AutoIncrement.
#AutoIt3Wrapper_cvsWrapper_Parameters= ; /NoPrompt: Will skip the cvsComments prompt
; /Comments: Text to added in the cvsComments. It can also contain the below variables.
;===============================================================================================================
; RUN BEFORE AND AFTER definitions
; The following directives can contain: these variables
; ????%in% , %out%, %icon% which will be replaced by the fullpath\filename.
; ????%scriptdir% same as @ScriptDir and %scriptfile% = filename without extension.
; ????%fileversion% is the information from the #AutoIt3Wrapper_Res_Fileversion directive
; %scitedir% will be replaced by the SciTE program directory
; %autoitdir% will be replaced by the AutoIt3 program directory
#AutoIt3Wrapper_Run_Before= ;process to run before compilation - you can have multiple records that will be processed in sequence
#AutoIt3Wrapper_Run_After= ;process to run After compilation - you can have multiple records that will be processed in sequence
;===============================================================================================================
; RUN BEFORE AND AFTER definitions
#AutoIt3Wrapper_Add_Constants= ;Add the needed standard constant include files. Will only run one time.
#EndRegion
#cs ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
AU3 版本:
脚本作者:
Email:
QQ/TM:
脚本版本:
脚本功能:
#ce ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿脚本开始＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
而测试中发现一个错误：
"D:\autoit3361-2\SciTE\ACNWrapper\ACNWrapper.exe" /run /ErrorStdOut /in "C:\Documents and Settings\Administrator\桌面\新建 AutoIt v3 脚本.au3" /autoit3dir "D:\autoit3361-2" /UserParams
+>00:05:34 开始执行 ACNWrapper v.1.0.0.13
+> ============================================
+>执行环境:
+> CPU构架: X64
+> 系统构架: X86
+> 系统语言: 0804
+> 键盘布局: 00000804
+> 内存总量: 2046MB
+> 内存剩余: 1296MB
+> 操作系统: WIN_XP/Service Pack 3
+> AU3版本: 3.3.6.1
+> ============================================
- 跳过 #Compiler_Res_Field 参数, 不能有 | 在里面:
- 跳过 #Compiler_Res_Field 参数, 不能有 | 在里面:
- 跳过 #Compiler_Res_Field 参数, 不能有 | 在里面:
>运行 AU3Check (1.54.19.0)开始目录:D:\autoit3361-2
C:\Documents and Settings\Administrator\桌面\新建 AutoIt v3 脚本.au3(74,124) : 错误: 表达式错误
#AutoIt3Wrapper_PlugIn_Funcs= ;Define PlugIn function names separated by a Comma to avoid AU3Check errors~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
C:\Documents and Settings\Administrator\桌面\新建 AutoIt v3 脚本.au3 - 1 error(s), 0 warning(s)
19, 0!>00:05:35 AU3Check 完成::2
>运行:(3.3.6.1):D:\autoit3361-2\autoit3.exe "C:\Documents and Settings\Administrator\桌面\新建 AutoIt v3 脚本.au3"
+>00:05:56 AutoIT3.exe 完成::0
+>00:05:58 ACNWrapper 完成..
>退出代码: 0 运行时间: 23.595 秒 本帖最后由 gzh888666 于 2010-11-10 14:00 编辑
定义插件功能用逗号分开，以免AU3检查错误的名称！
#AutoIt3Wrapper_PlugIn_Funcs=
这句无法编译，请高手指教！我菜鸟，初学者！以前没有发现这个情况呀！
没人看！自己顶！ 没有用上第二版！估计不会有错误的！ 楼主用了源代码整理？ 没有呀！就是原始的新建AU3 不用管它，没影响 mark
#Region ;**** 参数创建于 ACNWrapper_GUI ****
#AutoIt3Wrapper_outfile=C:\Users\Compaq\Desktop\新建 AutoIt v3 脚本.exe
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Fileversion=0.0.0.4
#AutoIt3Wrapper_Res_Fileversion_AutoIncrement=p
#EndRegion ;**** 参数创建于 ACNWrapper_GUI ****
#Region AutoIt3Wrapper 预编译参数(常用参数)
;#AutoIt3Wrapper_Res_Field=AutoIt Version|%AutoItVer% ;自定义资源段
;#AutoIt3Wrapper_Run_Tidy= ;脚本整理
;#AutoIt3Wrapper_Run_Obfuscator= ;代码迷惑
;#AutoIt3Wrapper_Run_AU3Check= ;语法检查
;#AutoIt3Wrapper_Run_Before= ;运行前
;#AutoIt3Wrapper_Run_After= ;运行后
#EndRegion AutoIt3Wrapper 预编译参数设置完成
#cs ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Au3 版本:
脚本作者:
Email:
QQ/TM:
脚本版本:
脚本功能:
#ce ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿脚本开始＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
我新建是这样的 我的新建的怎么是那样的呀！ 我以前用3.3.5.6的时候也是好的，后来出现和楼主一样的问题，不知道是操作过什么东西，后来换3.3.6.1好了
出问题的代码是第74行
页:
[1]