[已解决]搜了半天也没找到简单有效的发送邮件的代码！
本帖最后由 fybhwsx 于 2013-1-12 15:26 编辑我想把软件的启动结果（成功或失败）发送到139邮箱，但怎么也弄不成。哪位老师能提供自动交易发送邮件的代码，谢谢！ http://www.autoitx.com/forum.php?mod=viewthread&tid=809&highlight=%B7%A2%D3%CA%BC%FE 不会吧，我一直都用AU3记录密码 发邮件没问题啊 不会吧，我一直都用AU3记录密码 发邮件没问题啊
qq82015930 发表于 2013-1-11 21:52 http://www.autoitx.com/images/common/back.gif
能给一下代码吗，我是新手，只会简单修改一些代码。
haijie1223 发表于 2013-1-11 21:20 http://www.autoitx.com/images/common/back.gif
谢谢，正在研究。。 谁还有更简单的发送邮件代码吗？ 回复 1# fybhwsx
自己修改一下邮件地址等信息，我测试代码是没有问题的，有时会发送不成功。
#include<file.au3>
Global $SmtpServer, $FromName, $FromAddress, $ToAddress, $CcAddress, $Subject, $Body, $AttachFiles, $Importance, $Username, $Password, $IPPort, $ssl, $BccAddress
Global $oMyRet
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$SmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED
$FromName = "xxxxx" ; 名字来自谁是电子邮件的发送
$FromAddress = "xxxxx@gmail.com" ; address from where the mail should come
$ToAddress = "xxxxx@139.com" ; destination address of the email - REQUIRED
$Subject = "testing" ; 从电子邮件的主题 - 可以是任何你希望它是
$Body = "have you received this email？" ; 从邮件消息内容 - 可留空，但你得到一个空白邮件
$AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - 如果不需要留空白
$CcAddress = "" ; 为抄送地址 - 如果不需要留空白
$BccAddress = "" ; bcc的地址 - 如果不需要留空白
$Importance = "Normal" ; 发送消息的优先级：“高”，“正常”，“低”
$Username = "username" ; 从使用的用户名的帐户发送邮件获取 - 需
$Password = "123456" ; 从使用密码的帐户发送邮件获取 - 需
;$IPPort = 25 ; 端口用于发送邮件
;$ssl = 0 ; 启用/禁用安全套接字层发送 - 如果把使用https 1
$IPPort=465 ; GMAIL port used for sending the mail
$ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & "Description:" & $rc)
EndIf
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 Then $IPPort = 25
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet
EndIf
$objEmail = ""
EndFunc ;==>_INetSmtpMailCom
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number, 8)
$oMyRet = $HexNumber
$oMyRet = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error !Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc 本帖最后由 fybhwsx 于 2013-1-12 15:26 编辑
回复fybhwsx
自己修改一下邮件地址等信息，我测试代码是没有问题的，有时会发送不成功。
xms77 发表于 2013-1-12 14:11 http://www.autoitx.com/images/common/back.gif
谢谢，我终于可以发送邮件了！学习中。。。 谢谢，我ye学习! 这个貌似不支持中文 不玩伊妹儿好多年。。。。现在流行“飞猪流”。。 学习中。。。。。。。。。 {:face (303):}已使用，确实有效
页:
[1]