shuaiw 发表于 2013-3-25 17:46:32

[已解决]使用以下代码发邮件报错

本帖最后由 shuaiw 于 2013-3-29 16:30 编辑

;
;##################################
; Include
;##################################
#Include<file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "smtp.163.com.cn"            ; address for the smtp-server to use - REQUIRED
$FromName = "shuai"                      ; name from who the email was sent
$FromAddress = "shuai@163.com.cn" ; address from where the mail should come
$ToAddress = "shuai@163.com.cn"   ; destination address of the email - REQUIRED
$Subject = "Userinfo"                   ; subject from the email - can be anything you want it to be
$Body = "112"                               ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = ""                     ; the file you want to attach- leave blank if not needed
$CcAddress = "CCadress1@test.com"       ; address for cc - leave blank if not needed
$BccAddress = "BCCadress1@test.com"   ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "shuai"                  ; username for the account used from where the mail gets sent - REQUIRED
$Password = "890621"                  ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25                            ; port used for sending the mail
$ssl = 0                              ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465                        ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

;##################################
; Script
;##################################
Global $oMyRet
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
    MsgBox(0, "Error sending message", "Error code:" & @error & "Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
      $objEmail.HTMLBody = $as_Body
    Else
      $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
      Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
      For $x = 1 To $S_Files2Attach
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
            ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                $objEmail.AddAttachment ($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
      Next
    EndIf
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 then $IPPort = 25
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
      $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
      $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
      $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    If $ssl Then
      $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    EndIf
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
      Case "High"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
      Case "Normal"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
      Case "Low"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
      SetError(2)
      Return $oMyRet
    EndIf
    $objEmail=""
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet = $HexNumber
    $oMyRet = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc

xms77 发表于 2013-3-25 21:36:24

发送成功的列子如下，你看看不是不邮件服务器名称有问题或邮件服务器不支持smtp啊？
#include<file.au3>

Global $SmtpServer, $FromName, $FromAddress, $ToAddress, $CcAddress, $Subject, $Body, $AttachFiles, $Importance, $Username, $Password, $IPPort, $ssl, $BccAddress
Global $oMyRet
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")


      $SmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED
      $FromName = "ashui" ; 名字来自谁是电子邮件的发送
      $FromAddress = "smith770430@gmail.com" ; address from where the mail should come
      $ToAddress = "minshui.x.xi@seagate.com" ; destination address of the email - REQUIRED
      $Subject = "testing" ; 从电子邮件的主题 - 可以是任何你希望它是
      $Body = "have you received this email？" ; 从邮件消息内容 - 可留空，但你得到一个空白邮件
      $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - 如果不需要留空白
      $CcAddress = "xms<xms77@163.com>,seagatehsame@gmail.com" ; 为抄送地址 - 如果不需要留空白
      $BccAddress = "" ; bcc的地址 - 如果不需要留空白
      $Importance = "Normal" ; 发送消息的优先级：“高”，“正常”，“低”
      $Username = "smith770430@gmail.com" ; 从使用的用户名的帐户发送邮件获取 - 需
      $Password = "*******" ; 从使用密码的帐户发送邮件获取 - 需
      ;$IPPort = 25 ; 端口用于发送邮件
      ;$ssl = 0 ; 启用/禁用安全套接字层发送 - 如果把使用https 1
         $IPPort=465                        ; GMAIL port used for sending the mail
         $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
                        If @error Then
                              MsgBox(0, "Error sending message", "Error code:" & @error & "Description:" & $rc)
                        EndIf

; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
      Local $objEmail = ObjCreate("CDO.Message")
      $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
      $objEmail.To = $s_ToAddress
      Local $i_Error = 0
      Local $i_Error_desciption = ""
      If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
      If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
      $objEmail.Subject = $s_Subject
      If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
                $objEmail.HTMLBody = $as_Body
      Else
                $objEmail.Textbody = $as_Body & @CRLF
      EndIf
      If $s_AttachFiles <> "" Then
                Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
                For $x = 1 To $S_Files2Attach
                        $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
                        If FileExists($S_Files2Attach[$x]) Then
                              ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                              $objEmail.AddAttachment($S_Files2Attach[$x])
                        Else
                              ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                              SetError(1)
                              Return 0
                        EndIf
                Next
      EndIf
      $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
      $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
      If Number($IPPort) = 0 Then $IPPort = 25
      $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
      ;Authenticated SMTP
      If $s_Username <> "" Then
                $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
                $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
                $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
      EndIf
      If $ssl Then
                $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
      EndIf
      ;Update settings
      $objEmail.Configuration.Fields.Update
      ; Set Email Importance
      Switch $s_Importance
                Case "High"
                        $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
                Case "Normal"
                        $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
                Case "Low"
                        $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
      EndSwitch
      $objEmail.Fields.Update
      ; Sent the Message
      $objEmail.Send
      If @error Then
                SetError(2)
                Return $oMyRet
      EndIf
      $objEmail = ""
EndFunc   ;==>_INetSmtpMailCom

; Com Error Handler
Func MyErrFunc()
      $HexNumber = Hex($oMyError.number, 8)
      $oMyRet = $HexNumber
      $oMyRet = StringStripWS($oMyError.description, 3)
      ConsoleWrite("### COM Error !Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet & @LF)
      SetError(1); something to check for when this function returns
      Return
EndFunc   ;==>MyErrFunc回复 1# shuaiw

shuaiw 发表于 2013-3-26 16:18:00

恩，在这个代码上可以用了。谢谢帮助{:face (427):}

redapple2008 发表于 2018-8-6 11:01:06

---------------------------
Error sending message
---------------------------
Error code:2Description:与服务器的传输连接失败。
---------------------------
确定   
---------------------------
页: [1]
查看完整版本: [已解决]使用以下代码发邮件报错