[已解决]error: $GDIP_RLUM 上一次定义为一个 'Const' 变量?

oceanwind · 发表于 2014-12-11 10:11:49

本帖最后由 oceanwind 于 2014-12-11 19:17 编辑

在运行seniors的验证码（位置不固定验证码例子http://www.autoitx.com/forum.php ... =%D1%E9%D6%A4%C2%EB）时，出现如下很多错误：
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(110,33) : error: $GDIP_RLUM 上一次定义为一个 'Const' 变量..
Global Const $GDIP_RLUM = 0.3086
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(111,33) : error: $GDIP_GLUM 上一次定义为一个 'Const' 变量..
Global Const $GDIP_GLUM = 0.6094
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(112,33) : error: $GDIP_BLUM 上一次定义为一个 'Const' 变量..
Global Const $GDIP_BLUM = 0.0820
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2056,63) : error: _GDIPlus_BitmapCreateFromResource() 已经被定义.
Func _GDIPlus_BitmapCreateFromResource($hInst, $vResourceName)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2103,110) : error: _GDIPlus_BitmapCreateFromScan0() 已经被定义.
Func _GDIPlus_BitmapCreateFromScan0($iWidth, $iHeight, $iStride = 0, $iPixelFormat = 0x0026200A, $pScan0 = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2125,47) : error: _GDIPlus_BitmapCreateFromStream() 已经被定义.
Func _GDIPlus_BitmapCreateFromStream($pStream)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2171,49) : error: _GDIPlus_BitmapGetPixel() 已经被定义.
Func _GDIPlus_BitmapGetPixel($hBitmap, $iX, $iY)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2196,57) : error: _GDIPlus_BitmapSetPixel() 已经被定义.
Func _GDIPlus_BitmapSetPixel($hBitmap, $iX, $iY, $iARGB)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2318,34) : error: _GDIPlus_ColorMatrixCreate() 已经被定义.
Func _GDIPlus_ColorMatrixCreate()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2334,43) : error: _GDIPlus_ColorMatrixCreateGrayScale() 已经被定义.
Func _GDIPlus_ColorMatrixCreateGrayScale()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2362,42) : error: _GDIPlus_ColorMatrixCreateNegative() 已经被定义.
Func _GDIPlus_ColorMatrixCreateNegative()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2386,49) : error: _GDIPlus_ColorMatrixCreateSaturation() 已经被定义.
Func _GDIPlus_ColorMatrixCreateSaturation($nSat)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2425,74) : error: _GDIPlus_ColorMatrixCreateScale() 已经被定义.
Func _GDIPlus_ColorMatrixCreateScale($nRed, $nGreen, $nBlue, $nAlpha = 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2453,78) : error: _GDIPlus_ColorMatrixCreateTranslate() 已经被定义.
Func _GDIPlus_ColorMatrixCreateTranslate($nRed, $nGreen, $nBlue, $nAlpha = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(2903,92) : error: _GDIPlus_CustomLineCapCreate() 已经被定义.
Func _GDIPlus_CustomLineCapCreate($hPathFill, $hPathStroke, $iLineCap = 0, $nBaseInset = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(3409,48) : error: _GDIPlus_FontGetHeight() 已经被定义.
Func _GDIPlus_FontGetHeight($hFont, $hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(3783,65) : error: _GDIPlus_FontFamilyGetCellAscent() 已经被定义.
Func _GDIPlus_FontFamilyGetCellAscent($hFontFamily, $iStyle = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(3811,66) : error: _GDIPlus_FontFamilyGetCellDescent() 已经被定义.
Func _GDIPlus_FontFamilyGetCellDescent($hFontFamily, $iStyle = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(3839,63) : error: _GDIPlus_FontFamilyGetEmHeight() 已经被定义.
Func _GDIPlus_FontFamilyGetEmHeight($hFontFamily, $iStyle = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(3897,66) : error: _GDIPlus_FontFamilyGetLineSpacing() 已经被定义.
Func _GDIPlus_FontFamilyGetLineSpacing($hFontFamily, $iStyle = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4195,83) : error: _GDIPlus_GraphicsDrawClosedCurve2() 已经被定义.
Func _GDIPlus_GraphicsDrawClosedCurve2($hGraphics, $aPoints, $nTension, $hPen = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4245,77) : error: _GDIPlus_GraphicsDrawCurve2() 已经被定义.
Func _GDIPlus_GraphicsDrawCurve2($hGraphics, $aPoints, $nTension, $hPen = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4393,181) : error: _GDIPlus_GraphicsDrawImagePointsRect() 已经被定义.
Func _GDIPlus_GraphicsDrawImagePointsRect($hGraphics, $hImage, $nULX, $nULY, $nURX, $nURY, $nLLX, $nLLY, $nSrcX, $nSrcY, $nSrcWidth, $nSrcHeight, $iUnit = 2, $hImageAttributes = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4520,62) : error: _GDIPlus_GraphicsDrawPath() 已经被定义.
Func _GDIPlus_GraphicsDrawPath($hGraphics, $hPath, $hPen = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4644,101) : error: _GDIPlus_GraphicsFillClosedCurve2() 已经被定义.
Func _GDIPlus_GraphicsFillClosedCurve2($hGraphics, $aPoints, $nTension, $hBrush = 0, $iFillMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4685,64) : error: _GDIPlus_GraphicsFillPath() 已经被定义.
Func _GDIPlus_GraphicsFillPath($hGraphics, $hPath, $hBrush = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4820,68) : error: _GDIPlus_GraphicsFillRegion() 已经被定义.
Func _GDIPlus_GraphicsFillRegion($hGraphics, $hRegion, $hBrush = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4930,53) : error: _GDIPlus_GraphicsGetCompositingMode() 已经被定义.
Func _GDIPlus_GraphicsGetCompositingMode($hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(4957,56) : error: _GDIPlus_GraphicsGetCompositingQuality() 已经被定义.
Func _GDIPlus_GraphicsGetCompositingQuality($hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5031,55) : error: _GDIPlus_GraphicsGetInterpolationMode() 已经被定义.
Func _GDIPlus_GraphicsGetInterpolationMode($hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5237,57) : error: _GDIPlus_GraphicsGetTransform() 已经被定义.
Func _GDIPlus_GraphicsGetTransform($hGraphics, $hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5422,44) : error: _GDIPlus_GraphicsResetClip() 已经被定义.
Func _GDIPlus_GraphicsResetClip($hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5466,49) : error: _GDIPlus_GraphicsResetTransform() 已经被定义.
Func _GDIPlus_GraphicsResetTransform($hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5520,72) : error: _GDIPlus_GraphicsRotateTransform() 已经被定义.
Func _GDIPlus_GraphicsRotateTransform($hGraphics, $nAngle, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5569,82) : error: _GDIPlus_GraphicsScaleTransform() 已经被定义.
Func _GDIPlus_GraphicsScaleTransform($hGraphics, $nScaleX, $nScaleY, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5665,73) : error: _GDIPlus_GraphicsSetClipPath() 已经被定义.
Func _GDIPlus_GraphicsSetClipPath($hGraphics, $hPath, $iCombineMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5698,94) : error: _GDIPlus_GraphicsSetClipRect() 已经被定义.
Func _GDIPlus_GraphicsSetClipRect($hGraphics, $nX, $nY, $nWidth, $nHeight, $iCombineMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5729,77) : error: _GDIPlus_GraphicsSetClipRegion() 已经被定义.
Func _GDIPlus_GraphicsSetClipRegion($hGraphics, $hRegion, $iCombineMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5754,72) : error: _GDIPlus_GraphicsSetCompositingMode() 已经被定义.
Func _GDIPlus_GraphicsSetCompositingMode($hGraphics, $iCompositionMode)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5782,78) : error: _GDIPlus_GraphicsSetCompositingQuality() 已经被定义.
Func _GDIPlus_GraphicsSetCompositingQuality($hGraphics, $iCompositionQuality)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5813,76) : error: _GDIPlus_GraphicsSetInterpolationMode() 已经被定义.
Func _GDIPlus_GraphicsSetInterpolationMode($hGraphics, $iInterpolationMode)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5891,72) : error: _GDIPlus_GraphicsSetPixelOffsetMode() 已经被定义.
Func _GDIPlus_GraphicsSetPixelOffsetMode($hGraphics, $iPixelOffsetMode)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(5973,76) : error: _GDIPlus_GraphicsSetTextRenderingHint() 已经被定义.
Func _GDIPlus_GraphicsSetTextRenderingHint($hGraphics, $iTextRenderingHint)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(6015,94) : error: _GDIPlus_GraphicsTransformPoints() 已经被定义.
Func _GDIPlus_GraphicsTransformPoints($hGraphics, $aPoints, $iCoordSpaceTo, $iCoordSpaceFrom)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(6144,78) : error: _GDIPlus_GraphicsTranslateTransform() 已经被定义.
Func _GDIPlus_GraphicsTranslateTransform($hGraphics, $nDX, $nDY, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7015,90) : error: _GDIPlus_PathAddArc() 已经被定义.
Func _GDIPlus_PathAddArc($hPath, $nX, $nY, $nWidth, $nHeight, $nStartAngle, $nSweepAngle)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7046,84) : error: _GDIPlus_PathAddBezier() 已经被定义.
Func _GDIPlus_PathAddBezier($hPath, $nX1, $nY1, $nX2, $nY2, $nX3, $nY3, $nX4, $nY4)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7119,51) : error: _GDIPlus_PathAddClosedCurve() 已经被定义.
Func _GDIPlus_PathAddClosedCurve($hPath, $aPoints)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7201,45) : error: _GDIPlus_PathAddCurve() 已经被定义.
Func _GDIPlus_PathAddCurve($hPath, $aPoints)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7327,66) : error: _GDIPlus_PathAddEllipse() 已经被定义.
Func _GDIPlus_PathAddEllipse($hPath, $nX, $nY, $nWidth, $nHeight)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7353,58) : error: _GDIPlus_PathAddLine() 已经被定义.
Func _GDIPlus_PathAddLine($hPath, $nX1, $nY1, $nX2, $nY2)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7421,62) : error: _GDIPlus_PathAddPath() 已经被定义.
Func _GDIPlus_PathAddPath($hPath1, $hPath2, $fConnect = True)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7453,90) : error: _GDIPlus_PathAddPie() 已经被定义.
Func _GDIPlus_PathAddPie($hPath, $nX, $nY, $nWidth, $nHeight, $nStartAngle, $nSweepAngle)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7483,47) : error: _GDIPlus_PathAddPolygon() 已经被定义.
Func _GDIPlus_PathAddPolygon($hPath, $aPoints)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7519,68) : error: _GDIPlus_PathAddRectangle() 已经被定义.
Func _GDIPlus_PathAddRectangle($hPath, $nX, $nY, $nWidth, $nHeight)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7597,111) : error: _GDIPlus_PathAddString() 已经被定义.
Func _GDIPlus_PathAddString($hPath, $sString, $tLayout, $hFamily = 0, $iStyle = 0, $nSize = 8.5, $hFormat = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7644,32) : error: _GDIPlus_PathClone() 已经被定义.
Func _GDIPlus_PathClone($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7666,38) : error: _GDIPlus_PathCloseFigure() 已经被定义.
Func _GDIPlus_PathCloseFigure($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7712,41) : error: _GDIPlus_PathCreate() 已经被定义.
Func _GDIPlus_PathCreate($iFillMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7751,53) : error: _GDIPlus_PathCreate2() 已经被定义.
Func _GDIPlus_PathCreate2($aPtTypes, $iFillMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7787,34) : error: _GDIPlus_PathDispose() 已经被定义.
Func _GDIPlus_PathDispose($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7813,79) : error: _GDIPlus_PathFlatten() 已经被定义.
Func _GDIPlus_PathFlatten($hPath, $nFlatness = $FlatnessDefault, $hMatrix = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7853,34) : error: _GDIPlus_PathGetData() 已经被定义.
Func _GDIPlus_PathGetData($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7914,38) : error: _GDIPlus_PathGetFillMode() 已经被定义.
Func _GDIPlus_PathGetFillMode($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7938,39) : error: _GDIPlus_PathGetLastPoint() 已经被定义.
Func _GDIPlus_PathGetLastPoint($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(7968,40) : error: _GDIPlus_PathGetPointCount() 已经被定义.
Func _GDIPlus_PathGetPointCount($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8001,36) : error: _GDIPlus_PathGetPoints() 已经被定义.
Func _GDIPlus_PathGetPoints($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8186,66) : error: _GDIPlus_PathGetWorldBounds() 已经被定义.
Func _GDIPlus_PathGetWorldBounds($hPath, $hMatrix = 0, $hPen = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8223,85) : error: _GDIPlus_PathIsOutlineVisiblePoint() 已经被定义.
Func _GDIPlus_PathIsOutlineVisiblePoint($hPath, $nX, $nY, $hPen = 0, $hGraphics = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8259,67) : error: _GDIPlus_PathIsVisiblePoint() 已经被定义.
Func _GDIPlus_PathIsVisiblePoint($hPath, $nX, $nY, $hGraphics = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8282,32) : error: _GDIPlus_PathReset() 已经被定义.
Func _GDIPlus_PathReset($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8304,34) : error: _GDIPlus_PathReverse() 已经被定义.
Func _GDIPlus_PathReverse($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8329,50) : error: _GDIPlus_PathSetFillMode() 已经被定义.
Func _GDIPlus_PathSetFillMode($hPath, $iFillMode)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8352,36) : error: _GDIPlus_PathSetMarker() 已经被定义.
Func _GDIPlus_PathSetMarker($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8375,38) : error: _GDIPlus_PathStartFigure() 已经被定义.
Func _GDIPlus_PathStartFigure($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8398,46) : error: _GDIPlus_PathTransform() 已经被定义.
Func _GDIPlus_PathTransform($hPath, $hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8445,127) : error: _GDIPlus_PathWarp() 已经被定义.
Func _GDIPlus_PathWarp($hPath, $hMatrix, $aPoints, $nX, $nY, $nWidth, $nHeight, $iWarpMode = 0, $nFlatness = $FlatnessDefault)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8490,84) : error: _GDIPlus_PathWiden() 已经被定义.
Func _GDIPlus_PathWiden($hPath, $hMatrix, $nFlatness = $FlatnessDefault, $hPen = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8525,86) : error: _GDIPlus_PathWindingModeOutline() 已经被定义.
Func _GDIPlus_PathWindingModeOutline($hPath, $hMatrix, $nFlatness = $FlatnessDefault)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8618,37) : error: _GDIPlus_PathIterCreate() 已经被定义.
Func _GDIPlus_PathIterCreate($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8640,42) : error: _GDIPlus_PathIterDispose() 已经被定义.
Func _GDIPlus_PathIterDispose($hPathIter)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8757,50) : error: _GDIPlus_PathIterGetSubpathCount() 已经被定义.
Func _GDIPlus_PathIterGetSubpathCount($hPathIter)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8863,57) : error: _GDIPlus_PathIterNextMarkerPath() 已经被定义.
Func _GDIPlus_PathIterNextMarkerPath($hPathIter, $hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8961,58) : error: _GDIPlus_PathIterNextSubpathPath() 已经被定义.
Func _GDIPlus_PathIterNextSubpathPath($hPathIter, $hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(8989,41) : error: _GDIPlus_PathIterRewind() 已经被定义.
Func _GDIPlus_PathIterRewind($hPathIter)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(9711,44) : error: _GDIPlus_ImageLoadFromStream() 已经被定义.
Func _GDIPlus_ImageLoadFromStream($pStream)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(9787,57) : error: _GDIPlus_ImageRotateFlip() 已经被定义.
Func _GDIPlus_ImageRotateFlip($hImage, $iRotateFlipType)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(9859,76) : error: _GDIPlus_ImageSaveToStream() 已经被定义.
Func _GDIPlus_ImageSaveToStream($hImage, $pStream, $pEncoder, $pParams = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(9986,38) : error: _GDIPlus_ImageAttributesCreate() 已经被定义.
Func _GDIPlus_ImageAttributesCreate()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10008,56) : error: _GDIPlus_ImageAttributesDispose() 已经被定义.
Func _GDIPlus_ImageAttributesDispose($hImageAttributes)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10099,133) : error: _GDIPlus_ImageAttributesSetColorKeys() 已经被定义.
Func _GDIPlus_ImageAttributesSetColorKeys($hImageAttributes, $iColorAdjustType = 0, $fEnable = False, $iARGBLow = 0, $iARGBHigh = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10136,163) : error: _GDIPlus_ImageAttributesSetColorMatrix() 已经被定义.
Func _GDIPlus_ImageAttributesSetColorMatrix($hImageAttributes, $iColorAdjustType = 0, $fEnable = False, $pClrMatrix = 0, $pGrayMatrix = 0, $iColorMatrixFlags = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10455,94) : error: _GDIPlus_LineBrushCreate() 已经被定义.
Func _GDIPlus_LineBrushCreate($nX1, $nY1, $nX2, $nY2, $iARGBClr1, $iARGBClr2, $iWrapMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10504,107) : error: _GDIPlus_LineBrushCreateFromRect() 已经被定义.
Func _GDIPlus_LineBrushCreateFromRect($tRectF, $iARGBClr1, $iARGBClr2, $iGradientMode = 0, $iWrapMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10542,131) : error: _GDIPlus_LineBrushCreateFromRectWithAngle() 已经被定义.
Func _GDIPlus_LineBrushCreateFromRectWithAngle($tRectF, $iARGBClr1, $iARGBClr2, $nAngle, $fIsAngleScalable = True, $iWrapMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10660,54) : error: _GDIPlus_LineBrushGetColors() 已经被定义.
Func _GDIPlus_LineBrushGetColors($hLineGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10806,52) : error: _GDIPlus_LineBrushGetRect() 已经被定义.
Func _GDIPlus_LineBrushGetRect($hLineGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10892,85) : error: _GDIPlus_LineBrushMultiplyTransform() 已经被定义.
Func _GDIPlus_LineBrushMultiplyTransform($hLineGradientBrush, $hMatrix, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(10914,59) : error: _GDIPlus_LineBrushResetTransform() 已经被定义.
Func _GDIPlus_LineBrushResetTransform($hLineGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11000,63) : error: _GDIPlus_LineBrushSetBlend() 已经被定义.
Func _GDIPlus_LineBrushSetBlend($hLineGradientBrush, $aBlends)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11037,78) : error: _GDIPlus_LineBrushSetColors() 已经被定义.
Func _GDIPlus_LineBrushSetColors($hLineGradientBrush, $iARGBStart, $iARGBEnd)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11062,92) : error: _GDIPlus_LineBrushSetGammaCorrection() 已经被定义.
Func _GDIPlus_LineBrushSetGammaCorrection($hLineGradientBrush, $fUseGammaCorrection = True)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11088,81) : error: _GDIPlus_LineBrushSetLinearBlend() 已经被定义.
Func _GDIPlus_LineBrushSetLinearBlend($hLineGradientBrush, $nFocus, $nScale = 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11118,77) : error: _GDIPlus_LineBrushSetPresetBlend() 已经被定义.
Func _GDIPlus_LineBrushSetPresetBlend($hLineGradientBrush, $aInterpolations)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11157,80) : error: _GDIPlus_LineBrushSetSigmaBlend() 已经被定义.
Func _GDIPlus_LineBrushSetSigmaBlend($hLineGradientBrush, $nFocus, $nScale = 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11180,67) : error: _GDIPlus_LineBrushSetTransform() 已经被定义.
Func _GDIPlus_LineBrushSetTransform($hLineGradientBrush, $hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11260,36) : error: _GDIPlus_MatrixClone() 已经被定义.
Func _GDIPlus_MatrixClone($hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11351,42) : error: _GDIPlus_MatrixGetElements() 已经被定义.
Func _GDIPlus_MatrixGetElements($hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11383,37) : error: _GDIPlus_MatrixInvert() 已经被定义.
Func _GDIPlus_MatrixInvert($hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11483,64) : error: _GDIPlus_MatrixMultiply() 已经被定义.
Func _GDIPlus_MatrixMultiply($hMatrix1, $hMatrix2, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11510,82) : error: _GDIPlus_MatrixSetElements() 已经被定义.
Func _GDIPlus_MatrixSetElements($hMatrix, $nM11, $nM12, $nM21, $nM22, $nDX, $nDY)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11537,69) : error: _GDIPlus_MatrixShear() 已经被定义.
Func _GDIPlus_MatrixShear($hMatrix, $nShearX, $nShearY, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11575,56) : error: _GDIPlus_MatrixTransformPoints() 已经被定义.
Func _GDIPlus_MatrixTransformPoints($hMatrix, $aPoints)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11801,56) : error: _GDIPlus_PathBrushCreate() 已经被定义.
Func _GDIPlus_PathBrushCreate($aPoints, $iWrapMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11833,46) : error: _GDIPlus_PathBrushCreateFromPath() 已经被定义.
Func _GDIPlus_PathBrushCreateFromPath($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(11970,59) : error: _GDIPlus_PathBrushGetCenterPoint() 已经被定义.
Func _GDIPlus_PathBrushGetCenterPoint($hPathGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12031,59) : error: _GDIPlus_PathBrushGetFocusScales() 已经被定义.
Func _GDIPlus_PathBrushGetFocusScales($hPathGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12085,58) : error: _GDIPlus_PathBrushGetPointCount() 已经被定义.
Func _GDIPlus_PathBrushGetPointCount($hPathGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12201,52) : error: _GDIPlus_PathBrushGetRect() 已经被定义.
Func _GDIPlus_PathBrushGetRect($hPathGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12343,56) : error: _GDIPlus_PathBrushGetWrapMode() 已经被定义.
Func _GDIPlus_PathBrushGetWrapMode($hPathGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12371,85) : error: _GDIPlus_PathBrushMultiplyTransform() 已经被定义.
Func _GDIPlus_PathBrushMultiplyTransform($hPathGradientBrush, $hMatrix, $iOrder = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12393,59) : error: _GDIPlus_PathBrushResetTransform() 已经被定义.
Func _GDIPlus_PathBrushResetTransform($hPathGradientBrush)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12476,63) : error: _GDIPlus_PathBrushSetBlend() 已经被定义.
Func _GDIPlus_PathBrushSetBlend($hPathGradientBrush, $aBlends)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12512,67) : error: _GDIPlus_PathBrushSetCenterColor() 已经被定义.
Func _GDIPlus_PathBrushSetCenterColor($hPathGradientBrush, $iARGB)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12536,69) : error: _GDIPlus_PathBrushSetCenterPoint() 已经被定义.
Func _GDIPlus_PathBrushSetCenterPoint($hPathGradientBrush, $nX, $nY)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12567,79) : error: _GDIPlus_PathBrushSetFocusScales() 已经被定义.
Func _GDIPlus_PathBrushSetFocusScales($hPathGradientBrush, $nScaleX, $nScaleY)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12590,85) : error: _GDIPlus_PathBrushSetGammaCorrection() 已经被定义.
Func _GDIPlus_PathBrushSetGammaCorrection($hPathGradientBrush, $fUseGammaCorrection)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12616,81) : error: _GDIPlus_PathBrushSetLinearBlend() 已经被定义.
Func _GDIPlus_PathBrushSetLinearBlend($hPathGradientBrush, $nFocus, $nScale = 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12646,77) : error: _GDIPlus_PathBrushSetPresetBlend() 已经被定义.
Func _GDIPlus_PathBrushSetPresetBlend($hPathGradientBrush, $aInterpolations)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12685,80) : error: _GDIPlus_PathBrushSetSigmaBlend() 已经被定义.
Func _GDIPlus_PathBrushSetSigmaBlend($hPathGradientBrush, $nFocus, $nScale = 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12717,81) : error: _GDIPlus_PathBrushSetSurroundColorsWithCount() 已经被定义.
Func _GDIPlus_PathBrushSetSurroundColorsWithCount($hPathGradientBrush, $aColors)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12765,67) : error: _GDIPlus_PathBrushSetTransform() 已经被定义.
Func _GDIPlus_PathBrushSetTransform($hPathGradientBrush, $hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12792,68) : error: _GDIPlus_PathBrushSetWrapMode() 已经被定义.
Func _GDIPlus_PathBrushSetWrapMode($hPathGradientBrush, $iWrapMode)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(12876,59) : error: _GDIPlus_PenCreate2() 已经被定义.
Func _GDIPlus_PenCreate2($hBrush, $nWidth = 1, $iUnit = 2)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13614,48) : error: _GDIPlus_PenSetLineJoin() 已经被定义.
Func _GDIPlus_PenSetLineJoin($hPen, $iLineJoin)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13683,47) : error: _GDIPlus_PenSetStartCap() 已经被定义.
Func _GDIPlus_PenSetStartCap($hPen, $iLineCap)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13789,36) : error: _GDIPlus_RegionClone() 已经被定义.
Func _GDIPlus_RegionClone($hRegion)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13820,69) : error: _GDIPlus_RegionCombinePath() 已经被定义.
Func _GDIPlus_RegionCombinePath($hRegion, $hPath, $iCombineMode = 2)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13851,70) : error: _GDIPlus_RegionCombineRect() 已经被定义.
Func _GDIPlus_RegionCombineRect($hRegion, $tRectF, $iCombineMode = 2)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13885,79) : error: _GDIPlus_RegionCombineRegion() 已经被定义.
Func _GDIPlus_RegionCombineRegion($hRegionDst, $hRegionSrc, $iCombineMode = 2)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13907,29) : error: _GDIPlus_RegionCreate() 已经被定义.
Func _GDIPlus_RegionCreate()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13951,43) : error: _GDIPlus_RegionCreateFromPath() 已经被定义.
Func _GDIPlus_RegionCreateFromPath($hPath)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(13973,44) : error: _GDIPlus_RegionCreateFromRect() 已经被定义.
Func _GDIPlus_RegionCreateFromRect($tRectF)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(14024,38) : error: _GDIPlus_RegionDispose() 已经被定义.
Func _GDIPlus_RegionDispose($hRegion)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(14052,52) : error: _GDIPlus_RegionGetBounds() 已经被定义.
Func _GDIPlus_RegionGetBounds($hRegion, $hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(14155,50) : error: _GDIPlus_RegionGetHRgn() 已经被定义.
Func _GDIPlus_RegionGetHRgn($hRegion, $hGraphics)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(14460,50) : error: _GDIPlus_RegionTransform() 已经被定义.
Func _GDIPlus_RegionTransform($hRegion, $hMatrix)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(14484,52) : error: _GDIPlus_RegionTranslate() 已经被定义.
Func _GDIPlus_RegionTranslate($hRegion, $nDX, $nDY)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(14780,75) : error: _GDIPlus_StringFormatGetMeasurableCharacterRangeCount() 已经被定义.
Func _GDIPlus_StringFormatGetMeasurableCharacterRangeCount($hStringFormat)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(15014,70) : error: _GDIPlus_StringFormatSetLineAlign() 已经被定义.
Func _GDIPlus_StringFormatSetLineAlign($hStringFormat, $iStringAlign)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(15044,81) : error: _GDIPlus_StringFormatSetMeasurableCharacterRanges() 已经被定义.
Func _GDIPlus_StringFormatSetMeasurableCharacterRanges($hStringFormat, $aRanges)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(15229,101) : error: _GDIPlus_GraphicsMeasureCharacterRanges() 已经被定义.
Func _GDIPlus_GraphicsMeasureCharacterRanges($hGraphics, $sString, $hFont, $tLayout, $hStringFormat)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(15386,53) : error: _GDIPlus_TextureCreate() 已经被定义.
Func _GDIPlus_TextureCreate($hImage, $iWrapMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"D:\Program Files\AutoIt3\UserInclude\GDIPlusex.au3"(15419,83) : error: _GDIPlus_TextureCreate2() 已经被定义.
Func _GDIPlus_TextureCreate2($hImage, $nX, $nY, $nWidth, $nHeight, $iWrapMode = 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
E:\Myupdate\au3\ocr\seniors\seniors_位置大小不固定.au3 - 155 错误, 0 警告
繾繾繾繾繾繾繾!>09:44:11 AU3Check 完成. 按下 F4 跳转到下一次错误.[CODE]:2
+>09:44:11 ACNWrapper 完成..
是我版本不够新还是哪个include文件要更新？
谢谢先

netegg · 发表于 2014-12-11 13:24:13

不是不够新，是太新了

oceanwind · 发表于 2014-12-11 14:17:11

敢问元老如何化解？

austere · 发表于 2014-12-11 15:19:59

用老版本，或者自己修改一下~~~

oceanwind · 发表于 2014-12-11 15:34:59

回复 4# austere

能否给个例子

oceanwind · 发表于 2014-12-11 19:16:59

谢谢楼上的兄弟们，把
#include <GDIPlusex.au3>
改成
#include <GDIPlus.au3>
OK了

		自动登录	找回密码
密码			加入

[系统综合] [已解决]error: $GDIP_RLUM 上一次定义为一个 'Const' 变量?

相关帖子