找回密码
 加入
搜索
AUTOIT CN»论坛 › AU3交流 › 『 提问交流 』 › 已解决问题区 › 【已解决】脚本中只要包含#include <lsasecur.au3>就会 ...
返回列表 发新帖
查看: 2570|回复: 12

[AU3基础] 【已解决】脚本中只要包含#include <lsasecur.au3>就会未响应

 火 [复制链接]
zqjares
发表于 2016-11-23 09:32:57 | 显示全部楼层 |阅读模式
本帖最后由 zqjares 于 2016-11-23 13:36 编辑 
#include <Constants.au3>
#include <lsasecur.au3>
Opt("MustDeclareVars",1)
Local $isadmin
$isadmin = _SeIsUserAdminEx(@UserName)
If $isadmin = TRUE Then
        Run(@ComSpec & ' /c netsh -c interface ip set address "本地连接" dhcp')
Else
MsgBox(0,"123","没有权限")
EndIf
如上图的脚本，只是简单的判断本机用户有无管理员权限，要用到<lsasecur.au3>，但是一运行就会未响应，如图




这是论坛里面有人发出来的  用来检测电脑是否有管理员权限的 可以搜索到他的帖子：http://www.autoitx.com/forum.php ... hlight=lsasecur.au3
include, 本地连接

本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有账号？加入

×

相关帖子
回复

举报

Au3代码高亮发贴标签： [AU3] 你的代码 [/AU3]                   支持论坛的发展，请添加此》》网址导航《《为您的主页          
chzj589
发表于 2016-11-23 10:17:28 | 显示全部楼层
没有#include <lsasecur.au3>，谁也看不出问题
回复

举报

zqjares
 楼主| 发表于 2016-11-23 10:21:23 | 显示全部楼层
回复 2# chzj589
添加了附件了，麻烦帮忙看看 谢谢
回复

举报

水木子
发表于 2016-11-23 10:49:31 | 显示全部楼层
将“lsasecur.au3”文件和脚本放同目录试试！
#include <Constants.au3>
#include 'lsasecur.au3'
Opt("MustDeclareVars", 1)
Local $isadmin
$isadmin = _SeIsUserAdminEx(@UserName)
If $isadmin = True Then
        Run(@ComSpec & ' /c netsh -c interface ip set address "本地连接" dhcp')
Else
        MsgBox(0, "123", "没有权限")
EndIf
回复

举报

zqjares
 楼主| 发表于 2016-11-23 11:06:49 | 显示全部楼层
回复 4# 水木子


    依然是APPCRASH   故障模块 ntdll.dll

你那边运行不会报错吗？
回复

举报

zqjares
 楼主| 发表于 2016-11-23 11:10:22 | 显示全部楼层
回复 4# 水木子


我把lsasecur.au3里面用来判断管理员权限的那几段抽取出来新建了一个les.au3，然后用你的方法试了一下，就没有报错了
回复

举报

zqjares
 楼主| 发表于 2016-11-23 11:10:42 | 显示全部楼层
回复 4# 水木子


我把lsasecur.au3里面用来判断管理员权限的那几段抽取出来新建了一个les.au3，然后用你的方法试了一下，就没有报错了
#include-once
; #### Flags for _SeGetWellKnownAccountSid ####
; ============================================================================================================
Const $SE_WELLKNOWN_ADMIN = -1
Const $SE_WELLKNOWN_GUEST = -2
Const $SE_WELLKNOWN_POWER_USERS = -3
Const $SE_WELLKNOWN_USERS = -4
Const $SE_WELLKNOWN_ADMINS = -5
Const $SE_WELLKNOWN_GUESTS = -6
; ============================================================================================================

; #### Flags for SE_EXPLICIT_ACCESS.AccessMode ####
; ============================================================================================================
Const $SE_INVALID_ACCESS = 0
Const $SE_GRANT_ACCESS = 1
Const $SE_SET_ACCESS = 2
Const $SE_DENY_ACCESS = 3
Const $SE_REVOKE_ACCESS = 4
Const $SE_AUDIT_SUCCESS = 5
Const $SE_AUDIT_FAILURE = 6
; ============================================================================================================

; #### Maximum SID size ####
; ============================================================================================================
Const $SE_MAX_SID_SIZE = 68
; ============================================================================================================

; #### NT Well-Known Authorities ####
; ============================================================================================================
Const $SE_SECURITY_DIALUP_RID = 0x00000001
Const $SE_SECURITY_NETWORK_RID = 0x00000002
Const $SE_SECURITY_BATCH_RID = 0x00000003
Const $SE_SECURITY_INTERACTIVE_RID = 0x00000004
Const $SE_SECURITY_SERVICE_RID = 0x00000006
Const $SE_SECURITY_ANONYMOUS_LOGON_RID = 0x00000007
Const $SE_SECURITY_PROXY_RID = 0x00000008
Const $SE_SECURITY_SERVER_LOGON_RID = 0x00000009

Const $SE_SECURITY_LOGON_IDS_RID = 0x00000005
Const $SE_SECURITY_LOGON_IDS_RID_COUNT = 3
Const $SE_SECURITY_LOCAL_SYSTEM_RID = 0x00000012
Const $SE_SECURITY_NT_NON_UNIQUE = 0x00000015
Const $SE_SECURITY_BUILTIN_DOMAIN_RID = 0x00000020
; ============================================================================================================

; #### Relative Ids ####
; ============================================================================================================
Const $SE_DOMAIN_USER_RID_ADMIN = 0x000001F4
Const $SE_DOMAIN_USER_RID_GUEST = 0x000001F5

Const $SE_DOMAIN_GROUP_RID_ADMINS = 0x00000200
Const $SE_DOMAIN_GROUP_RID_USERS = 0x00000201
Const $SE_DOMAIN_GROUP_RID_GUESTS = 0x00000202

Const $SE_DOMAIN_ALIAS_RID_ADMINS = 0x00000220
Const $SE_DOMAIN_ALIAS_RID_USERS = 0x00000221
Const $SE_DOMAIN_ALIAS_RID_GUESTS = 0x00000222
Const $SE_DOMAIN_ALIAS_RID_POWER_USERS = 0x00000223
Const $SE_DOMAIN_ALIAS_RID_ACCOUNT_OPS = 0x00000224
Const $SE_DOMAIN_ALIAS_RID_SYSTEM_OPS = 0x00000225
Const $SE_DOMAIN_ALIAS_RID_PRINT_OPS = 0x00000226
Const $SE_DOMAIN_ALIAS_RID_BACKUP_OPS = 0x00000227
Const $SE_DOMAIN_ALIAS_RID_REPLICATOR = 0x00000228
; ============================================================================================================

; #### Lsasecur's structures definition ####
; ============================================================================================================
Const $tagSE_BUFFERW = "word Length;word MaxLength;ptr BufferW"
Const $tagSE_SID_ATTRIBUTES = "ptr Sid;dword Attributes"
Const $tagSE_LUID_ATTRIBUTES = "int64 Luid;dword Attributes"
Const $tagSE_PRIV_SET = "dword Count;dword Control;" & $tagSE_LUID_ATTRIBUTES
Const $tagSE_ACCESS_HEADER = "byte AceType;byte AceFlags;word AceSize"
Const $tagSE_ACCESS_ACE = $tagSE_ACCESS_HEADER & ";ptr AccessMask;dword SidStart"
Const $tagSE_TRUSTEE = "ptr MultiTrustee;dword MultiTrusteeOperation;dword TrusteeFrom;dword TrusteeType;ptr Name"
Const $tagSE_EXPLICIT_ACCESS = "ptr AccessMask;dword AccessMode;dword Inheritance;" & $tagSE_TRUSTEE
Const $tagSE_ACCESS_CONTROL_LIST = "word Revision;word AclSize;dword AceCount;" & $tagSE_ACCESS_ACE
Const $tagSE_ABSOLUTE_DESCRIPTOR = "word Revision;word ControlFlags;ptr Owner;ptr Group;ptr Sacl;ptr Dacl"
Const $tagSE_SELF_RELATIVE_DESCRIPTOR = "word Revision;word ControlFlags;dword Owner;dword Group;dword Sacl;dword Dacl"
Const $tagSE_GENERIC_MAPPING = "dword GenericRead;dword GenericWrite;dword GenericExecute;dword GenericAll"
Const $tagSE_TOKEN_STATISTICS = "int64 TokenId;int64 AuthenticationId;int64 ExpirationTime;long TokenType;long ImpersonationLevel;dword DynamicCharged;dword DynamicAvailable;dword GroupCount;dword PrivilegeCount;int64 ModifiedId"

Const $tagSE_PROCESS_INFO = "handle Process;handle Thread;dword ProcessId;dword ThreadId"
Const $tagSE_STARTUP_INFO = "dword Length;ptr Reserved;ptr Desktop;ptr Title;dword X;dword Y;dword XSize;dword YSize;dword XCountChars;dword YCountChars;dword FillAttributes;dword Flags;word ShowWindow;word Reserved2;ptr Reserved3;handle StdInput;handle StdOuput;handle StdError"

Const $tagSE_TREE_RESET_SECUR = "ptr Object;long ObjType;long SecurInfo;ptr Owner;ptr Group;ptr Dacl;ptr Sacl;bool KeepExplicit;ptr CallBack;ulong Invoke;ptr Context;wchar wzObject[260]"
Const $tagSE_MEMORY_NOTIFY = "ptr BaseAddress;dword Length;ptr CallBack;dword Equaled;hWnd Reserved"
Const $tagSE_SECURITY_QOS = "dword Length;dword ImpersonationLevel;bool ContextTrackingMode;boolean EffectiveOnly"
Const $tagSE_SECUR_ATTRIB = "dword Length;handle RootDir;ptr BufferW;ulong Attributes;ptr Securitydescriptor;ptr SecurityQos"
; ============================================================================================================

; #### Flags for SE_TRUSTEE.TrusteeFrom ####
; ============================================================================================================
Const $SE_TRUSTEE_IS_SID = 0
Const $SE_TRUSTEE_IS_NAME = 1
Const $SE_TRUSTEE_IS_BAD = 2
Const $SE_TRUSTEE_IS_OBJS_AND_SID = 3
Const $SE_TRUSTEE_IS_OBJS_AND_NAME = 4
; ============================================================================================================

; #### Handle to Heap ####
; ============================================================================================================
Const $SE_PROCESSHEAP = _SeProcessHeap()
; ============================================================================================================





Func _SeIsUserAdminEx($sUserName = @UserName)
        Local $pDacl, $pSid, $iAccessRights
        Local $aAceList[1][4] = [[_SeGetWellKnownAccountSid($SE_WELLKNOWN_ADMINS), 1, $SE_GRANT_ACCESS]]

        $pSid = _SeLookupAccountName($sUserName)
        $pDacl = _SeSetEntriesInAcl($aAceList)

        $iAccessRights = _SeGetEffectiveRightsFromAcl($pDacl, $pSid)
        Return SetError(@error, _SeLocalFree($pDacl), _SeHeapFree($pSid) * 0 + $iAccessRights)
EndFunc        ;==>_SeIsUserAdminEx


Func _SeLookupAccountName($sUserName = @UserName, $sSystem = "")
        Local $iResult, $pBuffer = _SeHeapAlloc($SE_MAX_SID_SIZE * 2)

        $iResult = DllCall("Advapi32.dll", "bool", "LookupAccountName", "str", $sSystem, _
                        "str", $sUserName, "ptr", $pBuffer, "dword*", $SE_MAX_SID_SIZE, _
                        "ptr", $pBuffer + $SE_MAX_SID_SIZE, "dword*", $SE_MAX_SID_SIZE, "long*", 0)
        If ($iResult[0]) Then
                Return SetError(0, $iResult[7], $pBuffer)
        Else
                Return SetError(_SeLastError(), _SeHeapFree($pBuffer) * 0 + $iResult[7], 0)
        EndIf
EndFunc        ;==>_SeLookupAccountName


Func _SeSetEntriesInAcl(ByRef $aEntry, $pExistingAcl = 0)
        Local $iUBound, $pBuffer, $iResult

        $iUBound = UBound($aEntry)
        $pBuffer = _SeInitExplicitEntries($aEntry, $iUBound)
        If ($pBuffer = 0) Then Return SetError(@error, 0, 0)

        $iResult = DllCall("AdvApi32.dll", "dword", "SetEntriesInAcl", "ulong", $iUBound, _
                        "ptr", $pBuffer, "ptr", $pExistingAcl, "ptr*", 0)
        If ($iResult[0]) Then
                Return SetError($iResult[0], _SeHeapFree($pBuffer), 0)
        Else
                Return SetExtended(_SeHeapFree($pBuffer), $iResult[4])
        EndIf
EndFunc        ;==>_SeSetEntriesInAcl

Func _SeGetWellKnownAccountSid($iWellKnown)
        Local $pSid

        Switch $iWellKnown
        Case $SE_WELLKNOWN_ADMIN, $SE_WELLKNOWN_GUEST
#CS
                Local $aUser, $aRid[2] = [500, 501]
                $aUser = _SeEnumLocalUsers($SE_FILTER_NORMAL_ACCOUNT)
                For $i = 1 To $aUser[0][0]
                        If $aUser[$i][3] = $aRid[Abs($iWellKnown) - 1] Then
                                $pSid = _SeLookupAccountName($aUser[$i][0])
                                Return SetError(@error, 0, $pSid)
                        EndIf
                Next
                Return 0
#CE

                Local $pDomainSid = _SeLookupAccountName(@ComputerName, @ComputerName)
                $pSid = _SeCreateWellKnownSid(37 + Abs($iWellKnown), $pDomainSid)
                SetError(@error, _SeHeapFree($pDomainSid))

        Case $SE_WELLKNOWN_POWER_USERS
                $pSid = _SeAllocAndInitSid(5, $SE_SECURITY_BUILTIN_DOMAIN_RID, $SE_DOMAIN_ALIAS_RID_POWER_USERS)
        Case $SE_WELLKNOWN_USERS
                $pSid = _SeAllocAndInitSid(5, $SE_SECURITY_BUILTIN_DOMAIN_RID, $SE_DOMAIN_ALIAS_RID_USERS)
        Case $SE_WELLKNOWN_ADMINS
                $pSid = _SeAllocAndInitSid(5, $SE_SECURITY_BUILTIN_DOMAIN_RID, $SE_DOMAIN_ALIAS_RID_ADMINS)
        Case $SE_WELLKNOWN_GUESTS
                $pSid = _SeAllocAndInitSid(5, $SE_SECURITY_BUILTIN_DOMAIN_RID, $SE_DOMAIN_ALIAS_RID_GUESTS)
        Case Else
                $pSid = _SeCreateWellKnownSid($iWellKnown)
        EndSwitch

        Return SetError(@error, 0, $pSid)
EndFunc        ;==>_SeGetWellKnownAccountSid

Func _SeGetEffectiveRightsFromAcl($pDacl, $pSid)
#CS
        If Not _SeIsValidSid($pSid) Then
                Return SetError(@error, 0, 0)
        EndIf
#CE
        Local $tBuffer, $pBuffer, $iResult

        $tBuffer = DllStructCreate($tagSE_TRUSTEE)
        $pBuffer = DllStructGetPtr($tBuffer)
        DllStructSetData($tBuffer, "Name", $pSid)
        DllStructSetData($tBuffer, "TruesteeFrom", $SE_TRUSTEE_IS_SID)

        $iResult = DllCall("AdvApi32.dll", "dword", "GetEffectiveRightsFromAcl", _
                        "ptr", $pDacl, "ptr", $pBuffer, "dword*", 0)
        Return SetError($iResult[0], 0, $iResult[3])
EndFunc        ;==>_SeGetEffectiveRightsFromAcl

Func _SeLocalFree($pBuffer)
        Local $iResult = DllCall("Kernel32.dll", "ptr", "LocalFree", "ptr", $pBuffer)
        Return SetError(_SeLastError(), 0, $iResult[0])
EndFunc        ;==>_SeLocalFree

Func _SeHeapFree($pBuffer, $iError = @error, $iExtended = @extended)
        If $pBuffer < 1 Then Return SetError($iError, $iExtended, 0)

        Local $iResult
        $iResult = DllCall("Kernel32.dll", "bool", "HeapFree", "handle", $SE_PROCESSHEAP, _
                        "int", 0, "ptr", $pBuffer)
        Return SetError($iError, $iExtended, $iResult[0])
EndFunc        ;==>_SeHeapFree

Func _SeProcessHeap()
        Local $iResult = DllCall("Kernel32.dll", "handle", "GetProcessHeap")
        Return $iResult[0]
EndFunc        ;==>_SeProcessHeap

Func _SeHeapAlloc($iBytesToAlloc = 8)
        If ($iBytesToAlloc < 1) Then Return 0

        Local $iResult
        $iResult = DllCall("Kernel32.dll", "ptr", "HeapAlloc", "handle", $SE_PROCESSHEAP, _
                        "int", 8, "int", $iBytesToAlloc)
        Return SetExtended($iBytesToAlloc, $iResult[0])
EndFunc        ;==>_SeHeapAlloc

Func _SeLastError()
        Local $iResult = DllCall("Kernel32.dll", "long", "GetLastError")
        Return $iResult[0]
EndFunc        ;==>_SeLastError

Func _SeInitExplicitEntries($aEntry, $iUBound)
        If UBound($aEntry, 0) <> 2 Then Return SetError(87, 0, 0)
        If UBound($aEntry, 2) <> 4 Then Return SetError(87, 0, 0)

        Local $pBuffer, $tBuffer
        $pBuffer = _SeHeapAlloc($iUBound * 32)

        For $i = 0 To $iUBound - 1
                If Not _SeIsValidSid($aEntry[$i][0]) Then
                        Return SetError(@error, _SeHeapFree($pBuffer), 0)
                EndIf

                $tBuffer = DllStructCreate($tagSE_EXPLICIT_ACCESS, $pBuffer + ($i * 32))
                DllStructSetData($tBuffer, "AccessMask", $aEntry[$i][1])
                DllStructSetData($tBuffer, "AccessMode", $aEntry[$i][2])
                DllStructSetData($tBuffer, "Inheritance", $aEntry[$i][3])
                DllStructSetData($tBuffer, "TrusteeFrom", $SE_TRUSTEE_IS_SID)
                DllStructSetData($tBuffer, "Name", $aEntry[$i][0])

                $tBuffer = 0
        Next
        Return $pBuffer
EndFunc        ;==>_SeInitExplicitEntries

Func _SeCreateWellKnownSid($iWellKnown, $pDomainSid = 0)
        Local $iResult, $pSid = _SeHeapAlloc($SE_MAX_SID_SIZE)

        $iResult = DllCall("AdvApi32.dll", "bool", "CreateWellKnownSid", "long", $iWellKnown, _
                        "ptr", $pDomainSid, "ptr", $pSid, "dword*", $SE_MAX_SID_SIZE)
        If ($iResult[0]) Then
                Return SetError(0, $iResult[4], $pSid)
        Else
                Return SetError(_SeLastError(), _SeHeapFree($pSid) * 0, 0)
        EndIf
EndFunc        ;==>_SeCreateWellKnownSid

Func _SeAllocAndInitSid($iAuthorityId, $iAuth0, $iAuth1 = 0, $iAuth2 = 0, $iAuth3 = 0, _
                $iAuth4 = 0, $iAuth5 = 0, $iAuth6 = 0, $iAuth7 = 0)

        Local $pAuthority, $iResult

        $pAuthority = _SeHeapAlloc(6)
        _SeWriteBytes($pAuthority + 5, $iAuthorityId, "byte", 1)

        $iResult = DllCall("AdvApi32.dll", "bool", "AllocateAndInitializeSid", "ptr", $pAuthority, _
                        "byte", @NumParams - 1, "dword", $iAuth0, "dword", $iAuth1, "dword", $iAuth2, _
                        "dword", $iAuth3, "dword", $iAuth4, "dword", $iAuth5, "dword", $iAuth6, _
                        "dword", $iAuth7, "ptr*", 0)

        Return SetError(_SeLastError(), _SeHeapFree($pAuthority), $iResult[11])
EndFunc        ;==>_SeAllocAndInitSid

Func _SeIsValidSid($pSid)
        Local $iResult = DllCall("AdvApi32.dll", "bool", "IsValidSid", "ptr", $pSid)
        If $iResult[0] Then
                Return 1
        Else
                Return SetError(1337, 0, 0)
        EndIf
EndFunc        ;==>_SeIsValidSid
Func _SeWriteBytes($pBuffer, $vData, $sType = "dword", $iBytesToWrite = 4)
        Local $fResult

        If ($sType <> "str") And ($sType <> "wstr") Then $sType &= "*"

        $fResult = _SeWriteProcessMemory(-1, $pBuffer, $vData, $iBytesToWrite, $sType)
        Return SetError(@error, @extended, $fResult)
EndFunc        ;==>_SeWriteBytes

Func _SeWriteProcessMemory($hProcess, $pBaseAddress, $pBuffer, $iSize, $sBufferType = "ptr")
        Switch $sBufferType
        Case "binary", "binary*"
                $sBufferType = "ptr"
                Local $tBuffer = DllStructCreate("ubyte Binary[" & $iSize & "]")
                DllStructSetData($tBuffer, "Binary", $pBuffer)
                $pBuffer = DllStructGetPtr($tBuffer)
        Case "str", "char"
                $iSize += 1
        Case "wstr", "wchar"
                $iSize += 2
        EndSwitch

        Local $iResult
        $iResult = DllCall("Kernel32.dll", "bool", "WriteProcessMemory", "handle", $hProcess, _
                        "ptr", $pBaseAddress, $sBufferType, $pBuffer, "dword", $iSize, _
                        "dword*", 0)
        If ($sBufferType = "binary") Or ($sBufferType = "binary*") Then $tBuffer = 0
        If (@error) Then
                Return SetError(87, 0, 0)
        Else
                Return SetError(_SeLastError(), $iResult[5], $iResult[0])
        EndIf
EndFunc        ;==>_SeWriteProcessMemory
回复

举报

haijie1223
发表于 2016-11-23 13:18:26 | 显示全部楼层
代码第一行添加：#pre_usex64=n 试试
回复

举报

zqjares
 楼主| 发表于 2016-11-23 13:35:55 | 显示全部楼层
回复 8# haijie1223


    卧槽，神了，这一行啥意思
回复

举报

1361739590
发表于 2016-11-23 15:49:34 | 显示全部楼层
回复 9# zqjares


    你的是64位系统，取消64位模式
回复

举报

1361739590
发表于 2016-11-23 15:50:35 | 显示全部楼层
回复 8# haijie1223


    #AutoIt3Wrapper_UseX64     #pre_usex64   这两种是一样的么？
回复

举报

haijie1223
发表于 2016-11-23 16:56:27 | 显示全部楼层
回复 11# 1361739590


    应该是一样的
回复

举报

cfanpc
发表于 2016-11-23 20:21:33 | 显示全部楼层
谢谢分享  学习了
回复

举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 加入

本版积分规则

QQ|手机版|小黑屋|AUTOIT CN ( 鲁ICP备19019924号-1 )谷歌 百度

GMT+8, 2024-12-25 12:40 , Processed in 0.090668 second(s), 25 queries .

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表