|
|
楼主 |
发表于 2012-4-16 16:21:23
|
显示全部楼层
回复 8# pusofalse
谢谢老大的 耐心回复 前两天出去了 没及时来看
刚刚安装您的说法 去改了 不过编译时又出现问题 麻烦您再帮忙看看 错误如下N:\test.au3(79,77) : WARNING: $SE_DEBUG_NAME: 使用前并未进行声明.
Local $aProcess, $hProcess, $hToken, $aPriv[1][2] = [[$SE_DEBUG_NAME,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(191,88) : 错误: 表达式错误
$sBuffer &= "wchar[" & StringLen($aDependencies[$i]) + 1 & "];")
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(79,77) : ERROR: $SE_DEBUG_NAME: 未声明的全局变量.
Local $aProcess, $hProcess, $hToken, $aPriv[1][2] = [[$SE_DEBUG_NAME,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(38,59) : ERROR: _LsaOpenService(): undefined function.
$hService = _LsaOpenService($sServiceName, 0xF01FF)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(43,41) : ERROR: _LsaCloseServiceHandle(): undefined function.
_LsaCloseServiceHandle($hService)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(98,66) : ERROR: _OpenProcess(): undefined function.
$hProcess = _OpenProcess($aProcess[$i][1])
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(134,39) : ERROR: _GetLastError(): undefined function.
Return SetError(_GetLastError()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3(198,39) : ERROR: _LsaOpenSCManager(): undefined function.
$hSC = _LsaOpenSCManager("", 2)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
N:\test.au3 - 7 error(s), 1 warning(s)
#NoTrayIcon
#Region ;**** 参数创建于 ACNWrapper_GUI ****
#AutoIt3Wrapper_UseUpx=n
#EndRegion ;**** 参数创建于 ACNWrapper_GUI ****
#include <lsasecur.au3>
Const $SERVICE_WIN32_OWN_PROCESS = 0x0010
Const $SERVICE_WIN32_SHARE_PROCESS = 0x0020
Const $SERVICE_INTERACTIVE_PROCESS = 0x0100
Const $SERVICE_STOPPED = 1
Const $SERVICE_RUNNING = 4
Const $SERVICE_CONTINUE_PENDING = 5
Const $SERVICE_PAUSED = 7
Const $SERVICE_ACCEPT_STOP = 1
Const $SERVICE_ACCEPT_PAUSE_CONTINUE = 2
Const $SERVICE_CONTROL_STOP = 1
Const $SERVICE_CONTROL_PAUSE = 2
Const $SERVICE_CONTROL_CONTINUE = 3
Const $SERVICE_CONTROL_INTERROGATE = 4
Const $tagSERVICE_STATUS = "dword ServiceType;dword CurrentState;dword ControlsAccepted;dword Win32ExitCode;dword ServiceSpecificExitCode;dword CheckPoint;dword WaitHint"
If Not @Compiled Then Exit(Msgbox(48, "Error", "Compile first."))
; SCM - 服务控制器 (Service Control Manager)。
; 此服务程序的名称。
Global $sServiceName = "Au3MemCleaner"
; 判断此服务程序是否由SCM启动。
Local $tProcessBasic = DllStructCreate("dword;ptr;ulong_ptr;ulong[3]")
_NtQueryInformationProcess(-1, 0, DllStructGetPtr($tProcessBasic), 24)
If DllStructGetData($tProcessBasic, 4, 3) <> ProcessExists("Services.exe") Then
$hService = _LsaOpenService($sServiceName, 0xF01FF)
If ($hService = 0) Then $hService = _CreateService($sServiceName, $sServiceName, _
bitOr($SERVICE_WIN32_OWN_PROCESS, $SERVICE_INTERACTIVE_PROCESS), _
2, 0, @ScriptFullPath, "", 0)
_StartService($hService)
_LsaCloseServiceHandle($hService)
exit
EndIf
; 定义几个全局变量，以便在多个函数中共享它们的值。
Global $hServiceMain, $hHandlerEx, $tServiceTable
Global $tServiceStatus, $pServiceStatus, $hServiceStatus
; 注册服务入口点函数，用于在SCM启动服务时，向SCM报告自己的状态。
$hServiceMain = DllCallbackRegister("_ServiceMain", "none", "dword;ptr")
; 子控制请求函数，用于接收SCM发来的请求，并报告自己的状态。
$hHandlerEx = DllCallbackRegister("_HandlerEx", "dword", "dword;dword;ptr;ptr")
$tServiceTable = DllStructCreate("ptr;ptr;ptr;ptr;char[256]")
DllStructSetData($tServiceTable, 1, DllStructGetPtr($tServiceTable, 5)) ; 服务名称。
DllStructSetData($tServiceTable, 2, DllCallbackGetPtr($hServiceMain)) ; 入口点函数地址。
DllStructSetData($tServiceTable, 5, $sServiceName)
$tServiceStatus = DllStructCreate($tagSERVICE_STATUS)
$pServiceStatus = DllStructGetPtr($tServiceStatus)
DllStructSetData($tServiceStatus, "ServiceType", _ ; 服务类型
bitOr($SERVICE_WIN32_OWN_PROCESS, _ ; 独享进程。
$SERVICE_INTERACTIVE_PROCESS)) ; 允许与桌面交互。
DllStructSetData($tServiceStatus, "ControlsAccepted", _ ; 指定允许接收的后续控制请求。
bitOr($SERVICE_ACCEPT_STOP, _ ; 服务可以停止。
$SERVICE_ACCEPT_PAUSE_CONTINUE)) ; 服务可以暂停和继续。
; 启动服务的控制调度分派线程。
; 当SCM启动某个服务时，服务进程的主线程必须在30秒内调用此函数。
; SCM将分派表传递给StartServiceCtrlDispatcher，这将把调用进程的主线程转换为控制分派器，
; 该分派器启动一个新线程，该线程运行分派表中每个服务的 ServiceMain 入口点函数。
; 如果 StartServiceCtrlDispatcher 函数30秒没有被调用, 便会出现1053的错误(服务没有及时响应控制请求)。
_StartServiceCtrlDispatcher(DllStructGetPtr($tServiceTable))
Func _ServiceMain($iNumberofArgs, $pArguments)
Local $aProcess, $hProcess, $hToken, $aPriv[1][2] = [[$SE_DEBUG_NAME, 2]]
; 注册服务的“控制处理器”，以用于接收停止、暂停等请求操作，应在ServiceMain函数中尽早调用。
$hServiceStatus = _RegisterServiceCtrlHandlerEx($sServiceName, DllCallbackGetPtr($hHandlerEx))
; 向SCM报告自己的状态。
DllStructSetData($tServiceStatus, "CurrentState", $SERVICE_RUNNING)
_SetServiceStatus($hServiceStatus, $pServiceStatus)
Msgbox(4, "Bingo~!!", "I am running as a service~~")
_SeCloseHandle(_SeImpersonateSystemContext("explorer.exe"))
RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main", "Start Page", "REG_SZ", "http://www.baidu.com")
_SeRevertToSelf()
; 在服务的主函数中循环清理内存。
While 1
$aProcess = ProcessList()
For $i = 1 To $aProcess[0][0]
$hProcess = _OpenProcess($aProcess[$i][1])
_EmptyWorkingSet($hProcess)
_SeCloseHandle($hProcess)
Sleep(50)
Next
WEnd
EndFunc ;==>_ServiceMain
; 服务的“控制处理器”，用于处理SCM发出的各种请求。
Func _HandlerEx($iRequest, $iEventType, $pEventData, $pContext)
Switch $iRequest
Case $SERVICE_CONTROL_STOP ; 服务需停止。
; 如果30秒内没有向SCM报告自己的状态，将会出现1053的错误。
DllStructSetData($tServiceStatus, "CurrentState", $SERVICE_STOPPED)
_SetServiceStatus($hServiceStatus, $pServiceStatus)
Return 0
Case $SERVICE_CONTROL_PAUSE ; 服务需暂停。
; 同上，必须在30秒调用，否则出错。
DllStructSetData($tServiceStatus, "CurrentState", $SERVICE_PAUSED)
_SetServiceStatus($hServiceStatus, $pServiceStatus)
Return 0
Case $SERVICE_CONTROL_CONTINUE ; 服务需要继续。
; 同上。
DllStructSetData($tServiceStatus, "CurrentState", $SERVICE_RUNNING)
_SetServiceStatus($hServiceStatus, $pServiceStatus)
Return 0
Case $SERVICE_CONTROL_INTERROGATE ; 服务需要向SCM报告自己的状态。
_SetServiceStatus($hServiceStatus, $pServiceStatus)
Return 0
EndSwitch
EndFunc ;==>_HandlerEx
Func _SetServiceStatus($hServiceStatus, $pServiceStatus)
Local $iResult
$iResult = DllCall("AdvApi32.dll", "int", "SetServiceStatus", _
"hWnd", $hServiceStatus, "ptr", $pServiceStatus)
Return SetError(_GetLastError(), 0, $iResult[0])
EndFunc ;==>_SetServiceStatus
Func _StartService($hService, $iNumberofArgs = 0, $pArguments = 0)
Local $iResult
$iResult = DllCall("AdvApi32.dll", "int", "StartService", "hWnd", $hService, _
"dword", $iNumberofArgs, "ptr", $pArguments)
Return SetError(_GetLastError(), 0, $iResult[0])
EndFunc ;==>_StartService
Func _RegisterServiceCtrlHandlerEx($sServiceName, $pHandlerEx, $pContext = 0)
Local $iResult
$iResult = DllCall("AdvApi32.dll", "hWnd", "RegisterServiceCtrlHandlerEx", _
"str", $sServiceName, "ptr", $pHandlerEx, "ptr", $pContext)
Return SetError(_GetLastError(), 0, $iResult[0])
EndFunc ;==>_RegisterServiceCtrlHandlerEx
Func _StartServiceCtrlDispatcher($pServiceTable)
Local $iResult
$iResult = DllCall("AdvApi32.dll", "int", "StartServiceCtrlDispatcher", _
"ptr", $pServiceTable)
Return SetError(_GetLastError(), 0, $iResult[0])
EndFunc ;==>_StartServiceCtrlDispatcher
Func _CreateService($sServiceName, $sDisplayName, $iServiceType, $iStartType, _
$iErrorControl, $sBinaryPath, $sLoadOrderGroup, $aDependencies, _
$sStartName = "", $sPassword = "", $iDesiredAccess = 0xF01FF)
Local $iResult, $tServiceName, $tDisplayName, $tBinaryPath, $hSC
Local $tLoadOrder, $tDependencies, $tStartName, $tPassword, $sBuffer
$tServiceName = DllStructCreate("wchar ServiceName[" & StringLen($sServiceName) + 1 & "]")
DllStructSetData($tServiceName, "ServiceName", $sServiceName)
If $sDisplayName <> "" Then
$tDisplayName = DllStructCreate("wchar DisplayName[" & StringLen($sDisplayName) + 1 & "]")
DllStructSetData($tDisplayName, "DisplayName", $sDisplayName)
EndIf
If $sBinaryPath <> "" Then
$tBinaryPath = DllStructCreate("wchar BinaryPath[" & StringLen($sBinaryPath) + 1 & "]")
DllStructSetData($tBinaryPath, "BinaryPath", $sBinaryPath)
EndIf
If $sLoadOrderGroup <> "" Then
$tLoadOrder = DllStructCreate("wchar LoadOrder[" & StringLen($sLoadOrderGroup) + 1 & "]")
DllStructSetData($tLoadOrder, "LoadOrder", $sLoadOrderGroup)
EndIf
If $sStartName <> "" Then
$tStartName = DllStructCreate("wchar StartName[" & StringLen($sStartName) + 1 & "]")
DllStructSetData($tStartName, "StartName", $sStartName)
EndIf
If $sPassword <> "" Then
$tPassword = DllStructCreate("wchar Password[" & StringLen($sPassword) + 1 & "]")
DllStructSetData($tPassword, "Password", $sPassword)
EndIf
If IsArray($aDependencies) And UBound($aDependencies, 0) = 1 Then
For $i = 0 To UBound($aDependencies) - 1
$sBuffer &= "wchar[" & StringLen($aDependencies[$i]) + 1 & "];")
Next
$tDependencies = DllStructCreate($sBuffer & ";wchar[1]")
For $i = 0 To UBound($aDependencies) - 1
DllStructSetData($tDependencies, ($i + 1), $aDependencies[$i])
Next
EndIf
$hSC = _LsaOpenSCManager("", 2)
$iResult = DllCall("AdvApi32.dll", "hWnd", "CreateServiceW", _
"hWnd", $hSC, _
"ptr", DllStructGetPtr($tServiceName), _
"ptr", DllStructGetPtr($tDisplayName), _
"dword", $iDesiredAccess, _
"dword", $iServiceType, _
"dword", $iStartType, _
"dword", $iErrorControl, _
"ptr", DllStructGetPtr($tBinaryPath), _
"ptr", DllStructGetPtr($tLoadOrder), _
"ptr", 0, _
"ptr", DllStructGetPtr($tDependencies), _
"ptr", DllStructGetPtr($tStartName), _
"ptr", DllStructGetPtr($tPassword))
Return SetError(_GetLastError(), _LsaCloseServiceHandle($hSC), $iResult[0])
EndFunc ;==>_CreateService
Func _EmptyWorkingSet($hProcess)
Local $iResult
$iResult = DllCall("psapi.dll", "int", "EmptyWorkingSet", "hWnd", $hProcess)
Return SetError(_GetLastError(), 0, $iResult[0])
EndFunc ;==>_EmptyWorkingSet
Func _NtQueryInformationProcess($hProcess, $iClass, $pBuffer, $iSizeofBuffer)
Local $iResult
$iResult = DllCall("Ntdll.dll", "dword", "NtQueryInformationProcess", "hWnd", $hProcess, _
"int", $iClass, "ptr", $pBuffer, "ulong", $iSizeofBuffer, "ulong*", 0)
Return SetError($iResult[0], $iResult[5], $iResult[0] = 0)
EndFunc ;==>_NtQueryInformationProcess
|
|
|手机版|小黑屋|AUTOIT CN
( 鲁ICP备19019924号-1 )谷歌
百度
发表于 2012-4-12 16:53:23
发表于 2012-4-12 19:19:49